Open css459 opened 8 years ago
Hi,
Have you tried it in GVIM or another term such as lxterminal?
I've got the same problem with both urxvt
and xterm
, and with termName
s: xterm
, xterm-256color
and so on.
Then I tried the same font on GVIM and lxterminal
, both just worked fine, so I think the problem is not a font's issue. It's must be a term
features/settings issue.
I cannot figure out why till now. Waiting for help.
All works well on MacVIM but GVIM under linux gives a similar behavior, so I suppose this is system oriented.
With GVIM, you specific the font by set guifont=
, have you try this yet?
The following thread gives informations that help to get urxvt works with powerline fonts. https://github.com/powerline/powerline/issues/684
I got urxvt displays powerline symbols well now, but no luck with Awesome fonts, nerd-fonts.
So I had this issue in urxvt and it took me a stupidly long time to find that (for me) this was caused by the characters being too closely spaced.
In my .Xresources
, I had
URxvt.letterSpace: 0
which caused some symbols not to be displayed
I changed this to URxvt.letterSpace: 1
and the symbols were displayed.
I'm not sure that this solves the above problem, as gvim did always show the missing symbols, but hopefully helps anyone who has read through the issues and is still stuck with symbols not displaying.
Even after trying to change the letterSpace instruction I still get the same problem... Any other hint?
Same problem over here. I tried in Terminator however and it was fine except for some spacing issue.
Ok, so, after digging around for a while I found out that the real issue (on some urxvt installs) is that on really lean builds not all options are actually compiled into urxvt. In other words see this:
http://powerline.readthedocs.io/en/master/troubleshooting.html#urxvt-unicode3-and-frills
For URxvt to show glyphs, you must use the single width variants (they end in Mono
Without those, only the single-width fitting glyphs will show
(unless you up URxvt.letterSpace
that is, but then everything looks all hokey)
More info: https://github.com/powerman/wcwidth-icons
I've tried adding letterSpace
, but certain character, such as "" still doesn't display for me..
Your .Xresources file has prefixes of the form: XTerm and UXTerm
But echo $TERM suggests you're using another terminal: $TERM outputs rxvt-unicode-256color
I'm running rxvt-unicode-256color and my prefixes are of the form: URxvt*
Just guessing here but I'm thinking XTerm works for xterm and URxvt works for rxvt-unicode-256color?
urxvt -letsp 0
worked for me, so I added URxvt.letterSpace: 0
to my ~/.Xresources
file.
It's zero explicitly. Don't rely on the internal default initialization of letterSpace, which in my system is evidently broken. If zero isn't enough, try letterSpace 1, which makes the terminal even wider.
Oh god finnaly i fixed it.
All was because two things:
My config .Xresources
:
URxvt.font: xft:DejaVu Sans:pixelsize=14,xft:Symbola,xft:Noto Emoji:minspace=False
Or you can test it by command
urxvt -fn 'xft:DejaVu Sans:pixelsize=14,xft:Symbola,xft:Noto Emoji:minspace=False'
letterSpace: 3+
2.2. Add minspace=False if you still want use Mono (And just for case anyway). It will help a little but you will still need biger letterSpace So problem i see - we have to expand letter-space somehow or scale down symbols that too big. Or fing good non-mono font. Actually without monospace font big symbols scaling down, but @ W M
scales down too and it looks ugly. Anyone know how to allow some symbols be greater than another?
p.s. I see urxvt-font-size packet in aur, maybe it might help p.p.s. Sooo i just moved to sakura terminal. It's pure urxvt problem that i can't fix
I actually fixed the font problem by following doronbehar's fix posted here
ln -s ~/.local/share/fonts ~/.fonts
None of the other fixes worked for me. letterSpace
looks terrible with anything but -1
for me.
I fixed it following solution from @Tymonrare.
My .Xresource file before:
URxvt*font: xft:Inconsolata Nerd Font Mono:pixelsize=27
URxvt*boldFont: xft:Inconsolata Nerd Font Mono:pixelsize=27
URxvt*letterSpace: 0
My .Xresource file after fix:
URxvt*font: xft:Inconsolata Nerd Font Mono:pixelsize=27:minspace=False, xft:DejaVu Sans:pixelsize=18
URxvt*boldFont: xft:Inconsolata Nerd Font Mono:pixelsize=27:minspace=False, xft:DejaVu Sans:pixelsize=18
URxvt*letterSpace: 0
As you can see I only added xft:DejaVu Sans:pixelsize=18
as my second font, and it was working good after that, although some fonts are still not showing up.
Hope that helps someone!
Woah, thanks @stevanmilic
Im using rxvt-unicode-patched on arch linux.
Ive set mine into
URxvt*font: xft:Inconsolata Nerd Font Mono:size=15, xft:DejaVu Sans:size=12
playing around with the values makes the icon fonts to be displayed
Recently dealt with this problem as a Fedora user and thought I'd chime in. I noted this bug report
. Powerline glyphs did not work on urxvt
and urxvt256c
, worked with urxvt256c-ml
.
Based on @stevanmilic's solution, I added the following to my .Xresources
:
#define font1 Inconsolata LGC
#define font2 Inconsolata Nerd Font
#define font3 DejaVu Sans Mono Nerd Font
#define font4 Noto Sans Mono CJK JP
URxvt*letterSpace: 0
URxvt*font: xft:font1:pixelsize=16, xft:font2:pixelsize=14:minspace=false, xft:font3:pixelsize=14,xft:font4:pixelsize=14
URxvt*boldFont: xft:font1:bold:pixelsize=16, xft:font2:pixelsize=14:minspace=False,xft:font3:pixelsize=14,xft:font4:pixelsize=14
URxvt*italicFont: xft:font1:italic:pixelsize=16, xft:font2:pixelsize=14:minspace=False,xft:font3:pixelsize=14,xft:font4:pixelsize=14
URxvt*boldItalicFont: xft:font1:bold:italic:pixelsize=16, xft:font2:pixelsize=14:minspace=False, xft:font3:pixelsize=14, xft:font4:pixelsize=14
This has very good Unicode symbol coverage, which you can see in this screenshot:
URxvtfont: xft:Inconsolata Nerd Font Mono:pixelsize=27:minspace=False, xft:DejaVu Sans:pixelsize=18 URxvtboldFont: xft:Inconsolata Nerd Font Mono:pixelsize=27:minspace=False, xft:DejaVu Sans:pixelsize=18 URxvt*letterSpace: 0
This was the final solution. Thanks
URxvt*font: xft:Inconsolata Nerd Font Mono:pixelsize=27:minspace=False, xft:DejaVu Sans:pixelsize=18
thanks, it work for me
Based on @stevanmilic's solution, I added the following to my
.Xresources
:#define font1 Inconsolata LGC #define font2 Inconsolata Nerd Font #define font3 DejaVu Sans Mono Nerd Font #define font4 Noto Sans Mono CJK JP URxvt*letterSpace: 0 URxvt*font: xft:font1:pixelsize=16, xft:font2:pixelsize=14:minspace=false, xft:font3:pixelsize=14,xft:font4:pixelsize=14 URxvt*boldFont: xft:font1:bold:pixelsize=16, xft:font2:pixelsize=14:minspace=False,xft:font3:pixelsize=14,xft:font4:pixelsize=14 URxvt*italicFont: xft:font1:italic:pixelsize=16, xft:font2:pixelsize=14:minspace=False,xft:font3:pixelsize=14,xft:font4:pixelsize=14 URxvt*boldItalicFont: xft:font1:bold:italic:pixelsize=16, xft:font2:pixelsize=14:minspace=False, xft:font3:pixelsize=14, xft:font4:pixelsize=14
This has very good Unicode symbol coverage, which you can see in this screenshot:
What's the browser you are using?
@sdh0618 that looks like qutebrowser
I'm still struggling with a couple of symbols. I got:
URxvt.font: xft:Liberation Mono for Powerline:antialias=true:hinting=true:pixelsize=22:minspace=false, xft:DejaVu Sans:pixelsize=22
URxvt.boldFont: xft:Liberation Mono for Powerline:antialias=true:hinting=true:pixelsize=22:weight=bold, xft:DejaVu Sans:pixelsize=22:weight=bold
URxvt.xftAntialias: true
URxvt.xftHinting: true
URxvt.letterSpace: -1
Xft.dpi: 96
Xft.antialias: true
Xft.rgba: rgb
Xft.hinting: true
Xft.hintstyle: hintsmedium
And,
$ urxvt256c-ml --help 2>&1 | grep options:
options: perl,xft,styles,combining,blink,iso14755,unicode3,encodings=eu+vn+jp+jp-ext+kr+zh+zh-ext,fade,transparent,tint,pixbuf,XIM,frills,selectionscrolling,wheel,slipwheel,smart-resize,cursorBlink,pointerBlank,scrollbars=plain+rxvt+NeXT+xterm
But this symbol does not display:
(Have tried with letterSpace 0 and 1)
For some reason, starting urxvt from terminal yields the message
urxvt: unable to calculate font width for 'Courier New:slant=0:weight=100:pixelsize=26:antialias=False:autohint=True:minspace=True', ignoring.
Even though there's no reference to Courier
anywhere in the config file and my system does not have Courier New
installed at all.
In my case the font works fine in xterm
but doesn't with urxvt
URxvt.font: xft: Source Code Pro for Powerline:style=Regular:size=11
XTerm.vt100.faceName: Source Code Pro for Powerline:style=Regular:size=11
And letterspacing , minspace=False, checking compile flags and urxvt256c-ml all didn't help.
I fixed it following solution from @Tymonrare.
My .Xresource file before:
URxvt*font: xft:Inconsolata Nerd Font Mono:pixelsize=27 URxvt*boldFont: xft:Inconsolata Nerd Font Mono:pixelsize=27 URxvt*letterSpace: 0
My .Xresource file after fix:
URxvt*font: xft:Inconsolata Nerd Font Mono:pixelsize=27:minspace=False, xft:DejaVu Sans:pixelsize=18 URxvt*boldFont: xft:Inconsolata Nerd Font Mono:pixelsize=27:minspace=False, xft:DejaVu Sans:pixelsize=18 URxvt*letterSpace: 0
As you can see I only added
xft:DejaVu Sans:pixelsize=18
as my second font, and it was working good after that, although some fonts are still not showing up.Hope that helps someone! This answer works, thankyou. However, I did some modification to make it look nicer in my terminal:
URxvt*font: xft:Fira Code Retina:pixelsize=11:minspace=False, xft:DejaVu Sans:pixelsize=8 URxvt*boldFont: xft:Fira Code Retina:pixelsize=11:minspace=False, xft:DejaVu Sans:pixelsize=8
But still it won't display this box icon (📦), still searching for the perfect solution.
I can display 📦 as well as ⌚ and maybe any other emoji using Symbola font
URxvt*font: xft:Fira Code Retina:pixelsize=11:minspace=False, xft:DejaVu Sans:pixelsize=8, xft: Symbola
URxvt*boldFont: xft:Fira Code Retina:pixelsize=11:minspace=False, xft:DejaVu Sans:pixelsize=8, xft: Symbola
I've been having trouble viewing certain unicode symbols under urxvt or xterm. The font I'm using is
Source Code Pro for Powerline
which I installed through the powerline fonts repo. My.Xresources
contains the following:but I still get funky behavior like in the following circumstances
$TERM
outputsrxvt-unicode-256color
Running
urxvt --help 2>&1 | grep options:
returnsiso14755
,unicode3
, andfrills
among other things.I've also made sure that my locale and LANG are indeed set to en_US-UTF-8 Output of
locale -a
C
en_US.utf8
POSIX
So I'm unsure why I still can't see some of these unicode symbols because I have all my bases covered? This is happening system-wide as I can't see certain symbols in Firefox either, so I think it has to be a font issue.