ppggff / vagrant-qemu

Use Vagrant to manage machines using QEMU. Test with Apple Silicon / M1 and CentOS aarch64 image
MIT License
431 stars 35 forks source link

Any example Vagrantfile to make 2 guests to communicate? #54

Open zakiharis opened 8 months ago

zakiharis commented 8 months ago

I saw issue #40 still open, but issue #30 is closed and said that I can use extra_qemu_args to achieve this.

But when I provisioned 2 guests, I cant make them ping each other.

Vagrantfile

Vagrant.configure('2') do |config|
  config.vm.box = "generic/ubuntu1804"

  (10..11).each_with_index do |address, index|
    vm_index = index + 1

    config.vm.define "nomad#{vm_index}" do |cp|
      cp.vm.hostname = "nomad#{vm_index}"
      cp.vm.provider "qemu" do |qe|
        qe.arch = "x86_64"
        qe.machine = "q35"
        qe.cpu = "max"
        qe.memory = "2G"
        qe.ssh_port = "50#{vm_index}22"
        qe.net_device = "virtio-net-pci"
        qe.extra_netdev_args = "net=10.100.100.0/24,dhcpstart=10.100.100.#{address}"
      end
    end
  end
end

nomad1

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
    inet 10.100.100.10/24 brd 10.100.100.255 scope global dynamic eth0
       valid_lft 85790sec preferred_lft 85790sec
    inet6 fec0::5054:ff:fe12:3456/64 scope site dynamic mngtmpaddr noprefixroute
       valid_lft 86139sec preferred_lft 14139sec
    inet6 fe80::5054:ff:fe12:3456/64 scope link
       valid_lft forever preferred_lft forever

nomad2

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
    inet 10.100.100.11/24 brd 10.100.100.255 scope global dynamic eth0
       valid_lft 85786sec preferred_lft 85786sec
    inet6 fec0::5054:ff:fe12:3456/64 scope site dynamic mngtmpaddr noprefixroute
       valid_lft 86363sec preferred_lft 14363sec
    inet6 fe80::5054:ff:fe12:3456/64 scope link
       valid_lft forever preferred_lft forever
PING 10.100.100.11 (10.100.100.11) 56(84) bytes of data.
From 10.100.100.10 icmp_seq=1 Destination Host Unreachable
From 10.100.100.10 icmp_seq=2 Destination Host Unreachable
From 10.100.100.10 icmp_seq=3 Destination Host Unreachable
From 10.100.100.10 icmp_seq=4 Destination Host Unreachable
From 10.100.100.10 icmp_seq=5 Destination Host Unreachable
From 10.100.100.10 icmp_seq=6 Destination Host Unreachable

^C--- 10.100.100.11 ping statistics ---
7 packets transmitted, 0 received, +6 errors, 100% packet loss, time 6149ms
pipe 4

I'm running on m1. Kindly advice

wdcapl commented 8 months ago

Have you tried communicating over host port forward? Just portforward and use the gateway ip address for both machines on both sides

MilanFun commented 7 months ago

Have you tried communicating over host port forward? Just portforward and use the gateway ip address for both machines on both sides

Could you provide example of config? (Default usage of vagrant port_forwarder ignored for qemu provider)

bombardun commented 1 month ago

I have the same question about multiple configuration