search

pr3y / Bruce

Predatory ESP32 Firmware
https://bruce.computer
GNU Affero General Public License v3.0
603 stars 90 forks source link

device support #384

Open cinouw opened 5 days ago

cinouw commented 5 days ago

lilygo t display s3 support would a good addition to supported devices list

bmorcelli commented 4 days ago

There are 3 models of T-Display

cinouw commented 3 days ago

There are 3 models of T-Display

  • Non touchscreen, with only 2 btns (probably won't be ported due to lack of btns, at least 3 are desired)
  • T-Display S3 Touch, can be done
  • T-Display S3 Pro, can be done

Hi I have the version with only 2 buttons I think it's doable with connecting a button to the gpio pins

If you think of doing it I can be the tester if you want

Thanks in advance

bmorcelli commented 3 days ago

I'm working on interfacing devices into Bruce, and maybe in the future we come up with a keyboard solution and navigation for 2btn devices..

I agree that adding btns and stuff to these boards is easy, but the harder part is give support to those who want to use the board, so I won't port for now due to this reason, but don't loose your faith ;)

cinouw commented 2 days ago

I'm working on interfacing devices into Bruce, and maybe in the future we come up with a keyboard solution and navigation for 2btn devices..

I agree that adding btns and stuff to these boards is easy, but the harder part is give support to those who want to use the board, so I won't port for now due to this reason, but don't loose your faith ;)

Long press for entering and short press for up and down could be a solution but I don't know better than you so I'll be waiting and I'll be always here ;)