-
A lot of accelerometer noise comes from sounds.
Is it possible to use some kind of fusion algorithm of microphone and accelerometer data to reduce the noise in accelerometer?
Or are there specific …
-
Hello!
I just wanted to ask what the behavior of the DRDY pin is.
Does it go high/stay-high until the uC reads the DRDY register? Does it stay high until all new data has been read? Is it just a…
-
## Description
Define logic for using the Accelerometer to raffle the dice with.
## Links?
[Android | Sensors](https://developer.android.com/guide/topics/sensors/sensors_overview.html)
[Android …
-
Probably due to the floating point conversion in these lines
`mpu_data->x = (int16_t)(data[0] y = (int16_t)(data[2] z = (int16_t)(data[4]
-
Basically just need to instantiate with `wpilib.BuiltInAccelerometer()` (note spelling of built-in, with the capital I), and read from getX(), getY(), getZ(). Possibly adjust range with some method t…
-
### Device name
ST LIS2HH12
### Device description
This is a ultra-low-power 3-axis accelerometer IC. It's full scale is selectable between +-2g, +-4g and +-8 g and the output rate can be between 1…
-
As titled, I have no issues with the accelerometer and gyroscope sketches and those are seem to be working fine, however, for the Simplemagnetometer sketch, I am having a static measurement on all thr…
-
**Is your feature request related to a problem? Please describe.**
When using my Pinecil V2 for embedding brass inserts into 3D prints, maintaining the soldering iron perfectly perpendicular to the i…
-
How does one parse the data coming IN from the HiTechnic Accelerometer? I need th LOG the x, y and z positions as the robot moves around. The code below is working on the EV3 but the text printin…
-
Hi,
There is something I do not understand. There is a scaling made [here](https://github.com/ivyknob/bno055_stm32/blob/master/bno055.c#L167) for the accelerometer but it is just a divider by 100 i…