probonopd
commented
4 years ago https://github.com/probonopd/WirelessPrinting/pull/128 is insufficient because it does not stop all other activity while a client is connected.
Open probonopd opened 4 years ago
probonopd
commented
4 years ago https://github.com/probonopd/WirelessPrinting/pull/128 is insufficient because it does not stop all other activity while a client is connected.
probonopd
commented
4 years ago Tried to implement this but getting
me@host:~$ avrdude -DV -p atmega1284p -c arduino -P net:192.168.0.33:2323 -b115200 -U flash:r:factory.hex:i
ioctl("TIOCMGET"): Inappropriate ioctl for device
ioctl("TIOCMGET"): Inappropriate ioctl for device
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not respondingIt seems that it understands that a connection is made and stops all other activity, but it does not seem to respond to the telnet client on port 2323 with what is coming from the printer's serial.
probonopd
commented
4 years ago I managed to get the transparent serial bridge to work up to the point that I can
telnet 192.168.0.33 2323and interactively issue commands and get back responses. I was hoping that this would be sufficient for using avrdude to flash firmware to the printer, but unfortunately I am getting
me@host:~$ avrdude -DV -p atmega1284p -P net:192.168.0.33:2323 -U flash:r:factory.hex:i -c stk500v1 -v -v -v -v -v
avrdude: Version 6.3
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is "/etc/avrdude.conf"
User configuration file is "/home/me/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Port : net:192.168.0.33:2323
Using Programmer : stk500v1
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
avrdude: Send: 0 [30] [20]
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00
avrdude: Send: 0 [30] [20] Preliminary PR: https://github.com/probonopd/WirelessPrinting/pull/128
Any help appreciated.
Do we need to reset the printer mainboard using its RESET pin? (It is broken out on the ICSP header)
probonopd
commented
4 years ago probonopd
commented
4 years ago Maybe we need to use HTTP-based flashing instead as described on https://github.com/jeelabs/esp-link/blob/master/UC-FLASHING.md?
https://github.com/jeelabs/esp-link/blob/master/esp-link/cgioptiboot.c
GMagician
commented
4 years ago Do we need to reset the printer mainboard using its RESET pin? (It is broken out on the ICSP header)
For mega2560 answer is yes, this is why Soc is reset when you activate usb connection.
probonopd
commented
4 years ago OK, so I manually reset the printer by grounding the reset pin on the ICSP header in the moment when uploading starts. I get a little further, but only to run into more errors. So I think the timing of the transparent serial bridge may not be sufficient for flashing?
me@host:~$ avrdude -DV -p atmega1284p -P net:192.168.0.33:2323 -U flash:r:factory.hex:i -c stk500v1 -v -v -v -v -v
avrdude: Version 6.3
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is "/etc/avrdude.conf"
User configuration file is "/home/me/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Port : net:192.168.0.33:2323
Using Programmer : stk500v1
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: Recv: . [14]
avrdude: Recv: . [10]
AVR Part : ATmega1284P
Chip Erase delay : 55000 us
PAGEL : PD7
BS2 : PA0
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
eeprom 65 10 128 0 no 4096 8 0 9000 9000 0xff 0xff
Memory Ops:
Oeration Inst Bit Bit Type Bitno Value
----------- -------- -------- ----- -----
READ 31 VALUE 7 1
30 VALUE 6 0
29 VALUE 5 1
28 VALUE 4 0
27 VALUE 3 0
26 VALUE 2 0
25 VALUE 1 0
24 VALUE 0 0
23 VALUE 7 0
22 VALUE 6 0
21 IGNORE 5 0
20 IGNORE 4 0
19 ADDRESS 11 0
18 ADDRESS 10 0
17 ADDRESS 9 0
16 ADDRESS 8 0
15 ADDRESS 7 0
14 ADDRESS 6 0
13 ADDRESS 5 0
12 ADDRESS 4 0
11 ADDRESS 3 0
10 ADDRESS 2 0
9 ADDRESS 1 0
8 ADDRESS 0 0
7 OUTPUT 7 0
6 OUTPUT 6 0
5 OUTPUT 5 0
4 OUTPUT 4 0
3 OUTPUT 3 0
2 OUTPUT 2 0
1 OUTPUT 1 0
0 OUTPUT 0 0
WRITE 31 VALUE 7 1
30 VALUE 6 1
29 VALUE 5 0
28 VALUE 4 0
27 VALUE 3 0
26 VALUE 2 0
25 VALUE 1 0
24 VALUE 0 0
23 VALUE 7 0
22 VALUE 6 0
21 IGNORE 5 0
20 IGNORE 4 0
19 ADDRESS 11 0
18 ADDRESS 10 0
17 ADDRESS 9 0
16 ADDRESS 8 0
15 ADDRESS 7 0
14 ADDRESS 6 0
13 ADDRESS 5 0
12 ADDRESS 4 0
11 ADDRESS 3 0
10 ADDRESS 2 0
9 ADDRESS 1 0
8 ADDRESS 0 0
7 INPUT 7 0
6 INPUT 6 0
5 INPUT 5 0
4 INPUT 4 0
3 INPUT 3 0
2 INPUT 2 0
1 INPUT 1 0
0 INPUT 0 0
LOADPAGE_LO 31 VALUE 7 1
30 VALUE 6 1
29 VALUE 5 0
28 VALUE 4 0
27 VALUE 3 0
26 VALUE 2 0
25 VALUE 1 0
24 VALUE 0 1
23 VALUE 7 0
22 VALUE 6 0
21 VALUE 5 0
20 VALUE 4 0
19 VALUE 3 0
18 VALUE 2 0
17 VALUE 1 0
16 VALUE 0 0
15 VALUE 7 0
14 VALUE 6 0
13 VALUE 5 0
12 VALUE 4 0
11 VALUE 3 0
10 ADDRESS 2 0
9 ADDRESS 1 0
8 ADDRESS 0 0
7 INPUT 7 0
6 INPUT 6 0
5 INPUT 5 0
4 INPUT 4 0
3 INPUT 3 0
2 INPUT 2 0
1 INPUT 1 0
0 INPUT 0 0
WRITEPAGE 31 VALUE 7 1
30 VALUE 6 1
29 VALUE 5 0
28 VALUE 4 0
27 VALUE 3 0
26 VALUE 2 0
25 VALUE 1 1
24 VALUE 0 0
23 VALUE 7 0
22 VALUE 6 0
21 IGNORE 5 0
20 IGNORE 4 0
19 ADDRESS 11 0
18 ADDRESS 10 0
17 ADDRESS 9 0
16 ADDRESS 8 0
15 ADDRESS 7 0
14 ADDRESS 6 0
13 ADDRESS 5 0
12 ADDRESS 4 0
11 ADDRESS 3 0
10 VALUE 2 0
9 VALUE 1 0
8 VALUE 0 0
7 IGNORE 7 0
6 IGNORE 6 0
5 IGNORE 5 0
4 IGNORE 4 0
3 IGNORE 3 0
2 IGNORE 2 0
1 IGNORE 1 0
0 IGNORE 0 0
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
flash 65 10 256 0 yes 131072 256 512 4500 4500 0xff 0xff
Memory Ops:
Oeration Inst Bit Bit Type Bitno Value
----------- -------- -------- ----- -----
READ_LO 31 VALUE 7 0
30 VALUE 6 0
29 VALUE 5 1
28 VALUE 4 0
27 VALUE 3 0
26 VALUE 2 0
25 VALUE 1 0
24 VALUE 0 0
23 ADDRESS 15 0
22 ADDRESS 14 0
21 ADDRESS 13 0
20 ADDRESS 12 0
19 ADDRESS 11 0
18 ADDRESS 10 0
17 ADDRESS 9 0
16 ADDRESS 8 0
15 ADDRESS 7 0
14 ADDRESS 6 0
13 ADDRESS 5 0
12 ADDRESS 4 0
11 ADDRESS 3 0
10 ADDRESS 2 0
9 ADDRESS 1 0
8 ADDRESS 0 0
7 OUTPUT 7 0
6 OUTPUT 6 0
5 OUTPUT 5 0
4 OUTPUT 4 0
3 OUTPUT 3 0
2 OUTPUT 2 0
1 OUTPUT 1 0
0 OUTPUT 0 0
READ_HI 31 VALUE 7 0
30 VALUE 6 0
29 VALUE 5 1
28 VALUE 4 0
27 VALUE 3 1
26 VALUE 2 0
25 VALUE 1 0
24 VALUE 0 0
23 ADDRESS 15 0
22 ADDRESS 14 0
21 ADDRESS 13 0
20 ADDRESS 12 0
19 ADDRESS 11 0
18 ADDRESS 10 0
17 ADDRESS 9 0
16 ADDRESS 8 0
15 ADDRESS 7 0
14 ADDRESS 6 0
13 ADDRESS 5 0
12 ADDRESS 4 0
11 ADDRESS 3 0
10 ADDRESS 2 0
9 ADDRESS 1 0
8 ADDRESS 0 0
7 OUTPUT 7 0
6 OUTPUT 6 0
5 OUTPUT 5 0
4 OUTPUT 4 0
3 OUTPUT 3 0
2 OUTPUT 2 0
1 OUTPUT 1 0
0 OUTPUT 0 0
LOADPAGE_LO 31 VALUE 7 0
30 VALUE 6 1
29 VALUE 5 0
28 VALUE 4 0
27 VALUE 3 0
26 VALUE 2 0
25 VALUE 1 0
24 VALUE 0 0
23 VALUE 7 0
22 VALUE 6 0
21 IGNORE 5 0
20 IGNORE 4 0
19 IGNORE 3 0
18 IGNORE 2 0
17 IGNORE 1 0
16 IGNORE 0 0
15 IGNORE 7 0
14 ADDRESS 6 0
13 ADDRESS 5 0
12 ADDRESS 4 0
11 ADDRESS 3 0
10 ADDRESS 2 0
9 ADDRESS 1 0
8 ADDRESS 0 0
7 INPUT 7 0
6 INPUT 6 0
5 INPUT 5 0
4 INPUT 4 0
3 INPUT 3 0
2 INPUT 2 0
1 INPUT 1 0
0 INPUT 0 0
LOADPAGE_HI 31 VALUE 7 0
30 VALUE 6 1
29 VALUE 5 0
28 VALUE 4 0
27 VALUE 3 1
26 VALUE 2 0
25 VALUE 1 0
24 VALUE 0 0
23 VALUE 7 0
22 VALUE 6 0
21 IGNORE 5 0
20 IGNORE 4 0
19 IGNORE 3 0
18 IGNORE 2 0
17 IGNORE 1 0
16 IGNORE 0 0
15 IGNORE 7 0
14 ADDRESS 6 0
13 ADDRESS 5 0
12 ADDRESS 4 0
11 ADDRESS 3 0
10 ADDRESS 2 0
9 ADDRESS 1 0
8 ADDRESS 0 0
7 INPUT 7 0
6 INPUT 6 0
5 INPUT 5 0
4 INPUT 4 0
3 INPUT 3 0
2 INPUT 2 0
1 INPUT 1 0
0 INPUT 0 0
WRITEPAGE 31 VALUE 7 0
30 VALUE 6 1
29 VALUE 5 0
28 VALUE 4 0
27 VALUE 3 1
26 VALUE 2 1
25 VALUE 1 0
24 VALUE 0 0
23 ADDRESS 15 0
22 ADDRESS 14 0
21 ADDRESS 13 0
20 ADDRESS 12 0
19 ADDRESS 11 0
18 ADDRESS 10 0
17 ADDRESS 9 0
16 ADDRESS 8 0
15 ADDRESS 7 0
14 IGNORE 6 0
13 IGNORE 5 0
12 IGNORE 4 0
11 IGNORE 3 0
10 IGNORE 2 0
9 IGNORE 1 0
8 IGNORE 0 0
7 IGNORE 7 0
6 IGNORE 6 0
5 IGNORE 5 0
4 IGNORE 4 0
3 IGNORE 3 0
2 IGNORE 2 0
1 IGNORE 1 0
0 IGNORE 0 0
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
lock 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
Memory Ops:
Oeration Inst Bit Bit Type Bitno Value
----------- -------- -------- ----- -----
READ 31 VALUE 7 0
30 VALUE 6 1
29 VALUE 5 0
28 VALUE 4 1
27 VALUE 3 1
26 VALUE 2 0
25 VALUE 1 0
24 VALUE 0 0
23 VALUE 7 0
22 VALUE 6 0
21 VALUE 5 0
20 VALUE 4 0
19 VALUE 3 0
18 VALUE 2 0
17 VALUE 1 0
16 VALUE 0 0
15 IGNORE 7 0
14 IGNORE 6 0
13 IGNORE 5 0
12 IGNORE 4 0
11 IGNORE 3 0
10 IGNORE 2 0
9 IGNORE 1 0
8 IGNORE 0 0
7 OUTPUT 7 0
6 OUTPUT 6 0
5 OUTPUT 5 0
4 OUTPUT 4 0
3 OUTPUT 3 0
2 OUTPUT 2 0
1 OUTPUT 1 0
0 OUTPUT 0 0
WRITE 31 VALUE 7 1
30 VALUE 6 0
29 VALUE 5 1
28 VALUE 4 0
27 VALUE 3 1
26 VALUE 2 1
25 VALUE 1 0
24 VALUE 0 0
23 VALUE 7 1
22 VALUE 6 1
21 VALUE 5 1
20 IGNORE 4 0
19 IGNORE 3 0
18 IGNORE 2 0
17 IGNORE 1 0
16 IGNORE 0 0
15 IGNORE 7 0
14 IGNORE 6 0
13 IGNORE 5 0
12 IGNORE 4 0
11 IGNORE 3 0
10 IGNORE 2 0
9 IGNORE 1 0
8 IGNORE 0 0
7 VALUE 7 1
6 VALUE 6 1
5 INPUT 5 0
4 INPUT 4 0
3 INPUT 3 0
2 INPUT 2 0
1 INPUT 1 0
0 INPUT 0 0
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
lfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
Memory Ops:
Oeration Inst Bit Bit Type Bitno Value
----------- -------- -------- ----- -----
READ 31 VALUE 7 0
30 VALUE 6 1
29 VALUE 5 0
28 VALUE 4 1
27 VALUE 3 0
26 VALUE 2 0
25 VALUE 1 0
24 VALUE 0 0
23 VALUE 7 0
22 VALUE 6 0
21 VALUE 5 0
20 VALUE 4 0
19 VALUE 3 0
18 VALUE 2 0
17 VALUE 1 0
16 VALUE 0 0
15 IGNORE 7 0
14 IGNORE 6 0
13 IGNORE 5 0
12 IGNORE 4 0
11 IGNORE 3 0
10 IGNORE 2 0
9 IGNORE 1 0
8 IGNORE 0 0
7 OUTPUT 7 0
6 OUTPUT 6 0
5 OUTPUT 5 0
4 OUTPUT 4 0
3 OUTPUT 3 0
2 OUTPUT 2 0
1 OUTPUT 1 0
0 OUTPUT 0 0
WRITE 31 VALUE 7 1
30 VALUE 6 0
29 VALUE 5 1
28 VALUE 4 0
27 VALUE 3 1
26 VALUE 2 1
25 VALUE 1 0
24 VALUE 0 0
23 VALUE 7 1
22 VALUE 6 0
21 VALUE 5 1
20 VALUE 4 0
19 VALUE 3 0
18 VALUE 2 0
17 VALUE 1 0
16 VALUE 0 0
15 IGNORE 7 0
14 IGNORE 6 0
13 IGNORE 5 0
12 IGNORE 4 0
11 IGNORE 3 0
10 IGNORE 2 0
9 IGNORE 1 0
8 IGNORE 0 0
7 INPUT 7 0
6 INPUT 6 0
5 INPUT 5 0
4 INPUT 4 0
3 INPUT 3 0
2 INPUT 2 0
1 INPUT 1 0
0 INPUT 0 0
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
hfuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
Memory Ops:
Oeration Inst Bit Bit Type Bitno Value
----------- -------- -------- ----- -----
READ 31 VALUE 7 0
30 VALUE 6 1
29 VALUE 5 0
28 VALUE 4 1
27 VALUE 3 1
26 VALUE 2 0
25 VALUE 1 0
24 VALUE 0 0
23 VALUE 7 0
22 VALUE 6 0
21 VALUE 5 0
20 VALUE 4 0
19 VALUE 3 1
18 VALUE 2 0
17 VALUE 1 0
16 VALUE 0 0
15 IGNORE 7 0
14 IGNORE 6 0
13 IGNORE 5 0
12 IGNORE 4 0
11 IGNORE 3 0
10 IGNORE 2 0
9 IGNORE 1 0
8 IGNORE 0 0
7 OUTPUT 7 0
6 OUTPUT 6 0
5 OUTPUT 5 0
4 OUTPUT 4 0
3 OUTPUT 3 0
2 OUTPUT 2 0
1 OUTPUT 1 0
0 OUTPUT 0 0
WRITE 31 VALUE 7 1
30 VALUE 6 0
29 VALUE 5 1
28 VALUE 4 0
27 VALUE 3 1
26 VALUE 2 1
25 VALUE 1 0
24 VALUE 0 0
23 VALUE 7 1
22 VALUE 6 0
21 VALUE 5 1
20 VALUE 4 0
19 VALUE 3 1
18 VALUE 2 0
17 VALUE 1 0
16 VALUE 0 0
15 IGNORE 7 0
14 IGNORE 6 0
13 IGNORE 5 0
12 IGNORE 4 0
11 IGNORE 3 0
10 IGNORE 2 0
9 IGNORE 1 0
8 IGNORE 0 0
7 INPUT 7 0
6 INPUT 6 0
5 INPUT 5 0
4 INPUT 4 0
3 INPUT 3 0
2 INPUT 2 0
1 INPUT 1 0
0 INPUT 0 0
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
efuse 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00
Memory Ops:
Oeration Inst Bit Bit Type Bitno Value
----------- -------- -------- ----- -----
READ 31 VALUE 7 0
30 VALUE 6 1
29 VALUE 5 0
28 VALUE 4 1
27 VALUE 3 0
26 VALUE 2 0
25 VALUE 1 0
24 VALUE 0 0
23 VALUE 7 0
22 VALUE 6 0
21 VALUE 5 0
20 VALUE 4 0
19 VALUE 3 1
18 VALUE 2 0
17 VALUE 1 0
16 VALUE 0 0
15 IGNORE 7 0
14 IGNORE 6 0
13 IGNORE 5 0
12 IGNORE 4 0
11 IGNORE 3 0
10 IGNORE 2 0
9 IGNORE 1 0
8 IGNORE 0 0
7 OUTPUT 7 0
6 OUTPUT 6 0
5 OUTPUT 5 0
4 OUTPUT 4 0
3 OUTPUT 3 0
2 OUTPUT 2 0
1 OUTPUT 1 0
0 OUTPUT 0 0
WRITE 31 VALUE 7 1
30 VALUE 6 0
29 VALUE 5 1
28 VALUE 4 0
27 VALUE 3 1
26 VALUE 2 1
25 VALUE 1 0
24 VALUE 0 0
23 VALUE 7 1
22 VALUE 6 0
21 VALUE 5 1
20 VALUE 4 0
19 VALUE 3 0
18 VALUE 2 1
17 VALUE 1 0
16 VALUE 0 0
15 IGNORE 7 0
14 IGNORE 6 0
13 IGNORE 5 0
12 IGNORE 4 0
11 IGNORE 3 0
10 IGNORE 2 0
9 IGNORE 1 0
8 IGNORE 0 0
7 VALUE 7 1
6 VALUE 6 1
5 VALUE 5 1
4 VALUE 4 1
3 VALUE 3 1
2 INPUT 2 0
1 INPUT 1 0
0 INPUT 0 0
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00
Memory Ops:
Oeration Inst Bit Bit Type Bitno Value
----------- -------- -------- ----- -----
READ 31 VALUE 7 0
30 VALUE 6 0
29 VALUE 5 1
28 VALUE 4 1
27 VALUE 3 0
26 VALUE 2 0
25 VALUE 1 0
24 VALUE 0 0
23 IGNORE 7 0
22 IGNORE 6 0
21 IGNORE 5 0
20 IGNORE 4 0
19 IGNORE 3 0
18 IGNORE 2 0
17 IGNORE 1 0
16 IGNORE 0 0
15 IGNORE 7 0
14 IGNORE 6 0
13 IGNORE 5 0
12 IGNORE 4 0
11 IGNORE 3 0
10 IGNORE 2 0
9 ADDRESS 1 0
8 ADDRESS 0 0
7 OUTPUT 7 0
6 OUTPUT 6 0
5 OUTPUT 5 0
4 OUTPUT 4 0
3 OUTPUT 3 0
2 OUTPUT 2 0
1 OUTPUT 1 0
0 OUTPUT 0 0
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00
Memory Ops:
Oeration Inst Bit Bit Type Bitno Value
----------- -------- -------- ----- -----
READ 31 VALUE 7 0
30 VALUE 6 0
29 VALUE 5 1
28 VALUE 4 1
27 VALUE 3 1
26 VALUE 2 0
25 VALUE 1 0
24 VALUE 0 0
23 VALUE 7 0
22 VALUE 6 0
21 VALUE 5 0
20 IGNORE 4 0
19 IGNORE 3 0
18 IGNORE 2 0
17 IGNORE 1 0
16 IGNORE 0 0
15 VALUE 7 0
14 VALUE 6 0
13 VALUE 5 0
12 VALUE 4 0
11 VALUE 3 0
10 VALUE 2 0
9 VALUE 1 0
8 VALUE 0 0
7 OUTPUT 7 0
6 OUTPUT 6 0
5 OUTPUT 5 0
4 OUTPUT 4 0
3 OUTPUT 3 0
2 OUTPUT 2 0
1 OUTPUT 1 0
0 OUTPUT 0 0
Programmer Type : STK500
Description : Atmel STK500 Version 1.x firmware
avrdude: Send: A [41] . [80] [20]
avrdude: Recv: . [14]
avrdude: Recv: . [10]
avrdude: Recv: . [14]
avrdude: stk500_getparm(): (a) protocol error, expect=0x14, resp=0x14
avrdude: Send: A [41] . [81] [20]
avrdude: Recv: . [03]
avrdude: stk500_getparm(): (a) protocol error, expect=0x14, resp=0x03
avrdude: Send: A [41] . [82] [20]
avrdude: Recv: . [10]
avrdude: stk500_getparm(): (a) protocol error, expect=0x14, resp=0x10
avrdude: Send: A [41] . [98] [20]
avrdude: Recv: . [14]
avrdude: Recv: . [05]
avrdude: Recv: . [10]
Hardware Version: 0
Firmware Version: 0.0
avrdude: Send: A [41] . [84] [20]
avrdude: Recv: . [14]
avrdude: Recv: . [00]
avrdude: Recv: . [10]
avrdude: Send: A [41] . [85] [20]
avrdude: Recv: . [14]
avrdude: Recv: . [03]
avrdude: Recv: . [10]
avrdude: Send: A [41] . [86] [20]
avrdude: Recv: . [14]
avrdude: Recv: . [03]
avrdude: Recv: . [10]
avrdude: Send: A [41] . [87] [20]
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding
avrdude: Send: A [41] . [89] [20]
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding
Vtarget : 0.0 V
Varef : 0.3 V
Oscillator : 0.000 Hz
SCK period : 23925.8 us
avrdude: Send: A [41] . [81] [20]
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding
avrdude: Send: A [41] . [82] [20]
avrdude: ser_recv(): read error: Connection reset by peer
avrdude: stk500_recv(): programmer is not responding
avrdude: Send: B [42] . [82] . [00] . [00] . [01] . [01] . [01] . [01] . [03] . [ff] . [ff] . [ff] . [ff] . [01] . [00] . [10] . [00] . [00] . [02] . [00] . [00] [20] avrdude: Recv: . [14] avrdude: stk500_getparm(): (a) protocol error, expect=0x14, resp=0x14
That's a little bit weird...received 14 and expected 14..
probonopd
commented
4 years ago Maybe received it too early or to late?
GMagician
commented
4 years ago avrdude: Send: A [41] . [80] [20] avrdude: Recv: . [14] avrdude: Recv: . [10] avrdude: Recv: . [14]
This is a wrong answer. It should respond 14, value, 10
probonopd
commented
4 years ago In any case, it's safe to say that my naive approach to it is not working. We'd probably need some magic along the lines of
but that is way over my head.
GMagician
commented
4 years ago jeelabs/esp-link#50
it seems like you get a 14 10 from previous query. because afer it you really get 14 3 10..Check if avrdude may increase timeout before resend command
Edit: I read more in above link and it says what I wrote above...not read all but that is what happens
probonopd
commented
4 years ago 
CraigHoffmann
commented
4 years ago Have you tried using this wifi bridge to control the 3d printer using something like repetier host? Repetier allows you to select TCP/IP connection with ip address and port.
probonopd
commented
4 years ago Yes, I had sent some codes and they worked.
ithinkido
commented
4 years ago probonopd
commented
4 years ago Thanks, so ESPLink seems to be able to do it. Does someone have the time to port it over?
ithinkido
commented
4 years ago probonopd
commented
4 years ago Cool. How to best integrate into this firmware?
gmag11
commented
1 year ago Thanks, so ESPLink seems to be able to do it. Does someone have the time to port it over?
Hi. I'm using plain ESPLink in my 3D printer together with socat in my server where Octoprint runs. It works normally.
Add a transparent serial bridge on port 2323 that would allow to interact with the printer as if it was connected to a serial port locally.
While a client is connected there, all other activity needs to be stopped, so that it does not interfere with the transparent serial bridge.
This should allow us to:
avrdudehttps://github.com/probonopd/WirelessPrinting/issues/55#issuecomment-509705764