this issue regards the file: final_revisions>top_platform.scad
Where the extruded aluminum sits into the the aluminum platform we need too add holes in the center of each of the inlays. The holes need to have a radius of 4mm. If for some reason this causes rendering issues, you can bump up the radius to no greater than 4.25mm.
Currently, the depth of the inlays is too deep, I would like the inlays to have a depth proportional to 1/4 of the aluminum platform's thickness, 6.25mm. This should be easy to accomplish but for some reason it was giving me trouble.
We need to decide if we want the logo entirely cut out or just etched on top of the platform.
this issue regards the file: final_revisions>top_platform.scad