this issue regards the file: final_revisions>bottom_platform.scad
The acrylic front panel, back panel, and side panels sit into "tracks" that are routed out of the aluminum platform. We need to revise the current depth. We need to be cautious of making these tracks too depth, because this may lead to the degradation of the aluminum's structural integrity. Therefore I would like the inlays to have a depth proportional to 1/6 of the aluminum platform's thickness, 6.25mm. (I am unsure if the thickness of the acrylic side panels is correct. So I will need to physically measure the materials thickness, and forward you the dimensions.)
Where the extruded aluminum sits into the the aluminum platform we need too add holes in the center of each of the inlays. The holes need to have a radius of 4mm. If for some reason this causes rendering issues, you can bump up the radius to no greater than 4.25mm.
this issue regards the file: final_revisions>bottom_platform.scad