Closed damirm57 closed 6 years ago
Hi !
You can't put the content of the arduino-variometer-master where you want. It must be put inside the "Arduino" folder.
So. 1) Empty your Arduino folder by putting all the files in one other location. 2) Put the content of the arduino-variometer-master folder inside your Arduino folder
Be carefull. Don't put the arduino-variometer-master folder inside the Arduino folder but just it's content.
Regards,
Baptiste.
Thank you Baptiste, thank you!!!! Upload is done!
Great !
Don't hesitate if you need more help.
Baptiste.
Ok, one more question. Is it posibile to use ms5611 sensor on separate board(gy-63) and another board with mpu-9250? Or I have to bye new one where is both sensor on same board? According to this sketch.
(I have sent to you a reply by mail)
Hi Damir !
Yes you can put as number of I2C boards as you want on the A4 and A5 pins. But sometimes you need to add two pull-up resistors. So :
-> Try first with only the two boards and check if it works. -> If it don't work, add also a 10k or 4,7k resistor between A5 and 3.3V and a 10k or 4,7k between A4 and 3.3V
Don't hesitate if you have more questions !
Baptiste.
Hi I can not compile variometar ino. mesage is: Arduino: 1.6.12 (Windows 7), TD: 1.35, Board: "Arduino Pro or Pro Mini, ATmega328 (5V, 16 MHz)"
C:\Program Files (x86)\Arduino\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\damir\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\damir\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\damir\Documents\Arduino\libraries -fqbn=arduino:avr:pro:cpu=16MHzatmega328 -ide-version=10612 -build-path C:\Users\damir\AppData\Local\Temp\arduino_build_833406 -warnings=none -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avrdude.path=C:\Program Files (x86)\Arduino\hardware\tools\avr -prefs=runtime.tools.avr-gcc.path=C:\Program Files (x86)\Arduino\hardware\tools\avr -verbose C:\Users\damir\Desktop\arduino-variometer-master (1)\arduino-variometer-master\variometer\variometer.ino C:\Program Files (x86)\Arduino\arduino-builder -compile -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\damir\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\damir\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\damir\Documents\Arduino\libraries -fqbn=arduino:avr:pro:cpu=16MHzatmega328 -ide-version=10612 -build-path C:\Users\damir\AppData\Local\Temp\arduino_build_833406 -warnings=none -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avrdude.path=C:\Program Files (x86)\Arduino\hardware\tools\avr -prefs=runtime.tools.avr-gcc.path=C:\Program Files (x86)\Arduino\hardware\tools\avr -verbose C:\Users\damir\Desktop\arduino-variometer-master (1)\arduino-variometer-master\variometer\variometer.ino Using board 'pro' from platform in folder: C:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20 Using core 'arduino' from platform in folder: C:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20 Detecting libraries used... "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_PRO -DARDUINO_ARCH_AVR "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\cores\arduino" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\variants\eightanaloginputs" "C:\Users\damir\AppData\Local\Temp\arduino_build_833406\sketch\variometer.ino.cpp" -o "nul" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_PRO -DARDUINO_ARCH_AVR "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\cores\arduino" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\variants\eightanaloginputs" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI\src" "C:\Users\damir\AppData\Local\Temp\arduino_build_833406\sketch\variometer.ino.cpp" -o "nul" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_PRO -DARDUINO_ARCH_AVR "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\cores\arduino" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\variants\eightanaloginputs" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI\src" "-IC:\Users\damir\Documents\Arduino\libraries\VarioSettings" "C:\Users\damir\AppData\Local\Temp\arduino_build_833406\sketch\variometer.ino.cpp" -o "nul" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_PRO -DARDUINO_ARCH_AVR "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\cores\arduino" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\variants\eightanaloginputs" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI\src" "-IC:\Users\damir\Documents\Arduino\libraries\VarioSettings" "-IC:\Users\damir\Documents\Arduino\libraries\I2CDev_ms5611" "C:\Users\damir\AppData\Local\Temp\arduino_build_833406\sketch\variometer.ino.cpp" -o "nul" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_PRO -DARDUINO_ARCH_AVR "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\cores\arduino" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\variants\eightanaloginputs" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI\src" "-IC:\Users\damir\Documents\Arduino\libraries\VarioSettings" "-IC:\Users\damir\Documents\Arduino\libraries\I2CDev_ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\ms5611" "C:\Users\damir\AppData\Local\Temp\arduino_build_833406\sketch\variometer.ino.cpp" -o "nul" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_PRO -DARDUINO_ARCH_AVR "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\cores\arduino" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\variants\eightanaloginputs" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI\src" "-IC:\Users\damir\Documents\Arduino\libraries\VarioSettings" "-IC:\Users\damir\Documents\Arduino\libraries\I2CDev_ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\vertaccel" "C:\Users\damir\AppData\Local\Temp\arduino_build_833406\sketch\variometer.ino.cpp" -o "nul" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_PRO -DARDUINO_ARCH_AVR "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\cores\arduino" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\variants\eightanaloginputs" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI\src" "-IC:\Users\damir\Documents\Arduino\libraries\VarioSettings" "-IC:\Users\damir\Documents\Arduino\libraries\I2CDev_ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\vertaccel" "-IC:\Users\damir\Documents\Arduino\libraries\LightInvensense" "C:\Users\damir\AppData\Local\Temp\arduino_build_833406\sketch\variometer.ino.cpp" -o "nul" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_PRO -DARDUINO_ARCH_AVR "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\cores\arduino" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\variants\eightanaloginputs" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI\src" "-IC:\Users\damir\Documents\Arduino\libraries\VarioSettings" "-IC:\Users\damir\Documents\Arduino\libraries\I2CDev_ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\vertaccel" "-IC:\Users\damir\Documents\Arduino\libraries\LightInvensense" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\EEPROM\src" "C:\Users\damir\AppData\Local\Temp\arduino_build_833406\sketch\variometer.ino.cpp" -o "nul" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_PRO -DARDUINO_ARCH_AVR "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\cores\arduino" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\variants\eightanaloginputs" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI\src" "-IC:\Users\damir\Documents\Arduino\libraries\VarioSettings" "-IC:\Users\damir\Documents\Arduino\libraries\I2CDev_ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\vertaccel" "-IC:\Users\damir\Documents\Arduino\libraries\LightInvensense" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\EEPROM\src" "-IC:\Users\damir\Documents\Arduino\libraries\kalmanvert" "C:\Users\damir\AppData\Local\Temp\arduino_build_833406\sketch\variometer.ino.cpp" -o "nul" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_PRO -DARDUINO_ARCH_AVR "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\cores\arduino" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\variants\eightanaloginputs" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI\src" "-IC:\Users\damir\Documents\Arduino\libraries\VarioSettings" "-IC:\Users\damir\Documents\Arduino\libraries\I2CDev_ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\vertaccel" "-IC:\Users\damir\Documents\Arduino\libraries\LightInvensense" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\EEPROM\src" "-IC:\Users\damir\Documents\Arduino\libraries\kalmanvert" "-IC:\Users\damir\Documents\Arduino\libraries\beeper" "C:\Users\damir\AppData\Local\Temp\arduino_build_833406\sketch\variometer.ino.cpp" -o "nul" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_PRO -DARDUINO_ARCH_AVR "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\cores\arduino" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\variants\eightanaloginputs" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI\src" "-IC:\Users\damir\Documents\Arduino\libraries\VarioSettings" "-IC:\Users\damir\Documents\Arduino\libraries\I2CDev_ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\vertaccel" "-IC:\Users\damir\Documents\Arduino\libraries\LightInvensense" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\EEPROM\src" "-IC:\Users\damir\Documents\Arduino\libraries\kalmanvert" "-IC:\Users\damir\Documents\Arduino\libraries\beeper" "-IC:\Users\damir\Documents\Arduino\libraries\LPtoneAC" "C:\Users\damir\AppData\Local\Temp\arduino_build_833406\sketch\variometer.ino.cpp" -o "nul" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_PRO -DARDUINO_ARCH_AVR "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\cores\arduino" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\variants\eightanaloginputs" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI\src" "-IC:\Users\damir\Documents\Arduino\libraries\VarioSettings" "-IC:\Users\damir\Documents\Arduino\libraries\I2CDev_ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\vertaccel" "-IC:\Users\damir\Documents\Arduino\libraries\LightInvensense" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\EEPROM\src" "-IC:\Users\damir\Documents\Arduino\libraries\kalmanvert" "-IC:\Users\damir\Documents\Arduino\libraries\beeper" "-IC:\Users\damir\Documents\Arduino\libraries\LPtoneAC" "-IC:\Users\damir\Documents\Arduino\libraries\varioscreen" "C:\Users\damir\AppData\Local\Temp\arduino_build_833406\sketch\variometer.ino.cpp" -o "nul" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_PRO -DARDUINO_ARCH_AVR "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\cores\arduino" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\variants\eightanaloginputs" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI\src" "-IC:\Users\damir\Documents\Arduino\libraries\VarioSettings" "-IC:\Users\damir\Documents\Arduino\libraries\I2CDev_ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\vertaccel" "-IC:\Users\damir\Documents\Arduino\libraries\LightInvensense" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\EEPROM\src" "-IC:\Users\damir\Documents\Arduino\libraries\kalmanvert" "-IC:\Users\damir\Documents\Arduino\libraries\beeper" "-IC:\Users\damir\Documents\Arduino\libraries\LPtoneAC" "-IC:\Users\damir\Documents\Arduino\libraries\varioscreen" "-IC:\Users\damir\Documents\Arduino\libraries\digit" "C:\Users\damir\AppData\Local\Temp\arduino_build_833406\sketch\variometer.ino.cpp" -o "nul" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_PRO -DARDUINO_ARCH_AVR "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\cores\arduino" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\variants\eightanaloginputs" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI\src" "-IC:\Users\damir\Documents\Arduino\libraries\VarioSettings" "-IC:\Users\damir\Documents\Arduino\libraries\I2CDev_ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\vertaccel" "-IC:\Users\damir\Documents\Arduino\libraries\LightInvensense" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\EEPROM\src" "-IC:\Users\damir\Documents\Arduino\libraries\kalmanvert" "-IC:\Users\damir\Documents\Arduino\libraries\beeper" "-IC:\Users\damir\Documents\Arduino\libraries\LPtoneAC" "-IC:\Users\damir\Documents\Arduino\libraries\varioscreen" "-IC:\Users\damir\Documents\Arduino\libraries\digit" "C:\Users\damir\AppData\Local\Temp\arduino_build_833406\sketch\NmeaParser.cpp" -o "nul" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_PRO -DARDUINO_ARCH_AVR "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\cores\arduino" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\variants\eightanaloginputs" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI\src" "-IC:\Users\damir\Documents\Arduino\libraries\VarioSettings" "-IC:\Users\damir\Documents\Arduino\libraries\I2CDev_ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\vertaccel" "-IC:\Users\damir\Documents\Arduino\libraries\LightInvensense" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\EEPROM\src" "-IC:\Users\damir\Documents\Arduino\libraries\kalmanvert" "-IC:\Users\damir\Documents\Arduino\libraries\beeper" "-IC:\Users\damir\Documents\Arduino\libraries\LPtoneAC" "-IC:\Users\damir\Documents\Arduino\libraries\varioscreen" "-IC:\Users\damir\Documents\Arduino\libraries\digit" "-IC:\Users\damir\Documents\Arduino\libraries\NmeaParser" "C:\Users\damir\AppData\Local\Temp\arduino_build_833406\sketch\NmeaParser.cpp" -o "nul" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_PRO -DARDUINO_ARCH_AVR "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\cores\arduino" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\variants\eightanaloginputs" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI\src" "-IC:\Users\damir\Documents\Arduino\libraries\VarioSettings" "-IC:\Users\damir\Documents\Arduino\libraries\I2CDev_ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\vertaccel" "-IC:\Users\damir\Documents\Arduino\libraries\LightInvensense" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\EEPROM\src" "-IC:\Users\damir\Documents\Arduino\libraries\kalmanvert" "-IC:\Users\damir\Documents\Arduino\libraries\beeper" "-IC:\Users\damir\Documents\Arduino\libraries\LPtoneAC" "-IC:\Users\damir\Documents\Arduino\libraries\varioscreen" "-IC:\Users\damir\Documents\Arduino\libraries\digit" "-IC:\Users\damir\Documents\Arduino\libraries\NmeaParser" "C:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI\src\SPI.cpp" -o "nul" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_PRO -DARDUINO_ARCH_AVR "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\cores\arduino" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\variants\eightanaloginputs" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI\src" "-IC:\Users\damir\Documents\Arduino\libraries\VarioSettings" "-IC:\Users\damir\Documents\Arduino\libraries\I2CDev_ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\vertaccel" "-IC:\Users\damir\Documents\Arduino\libraries\LightInvensense" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\EEPROM\src" "-IC:\Users\damir\Documents\Arduino\libraries\kalmanvert" "-IC:\Users\damir\Documents\Arduino\libraries\beeper" "-IC:\Users\damir\Documents\Arduino\libraries\LPtoneAC" "-IC:\Users\damir\Documents\Arduino\libraries\varioscreen" "-IC:\Users\damir\Documents\Arduino\libraries\digit" "-IC:\Users\damir\Documents\Arduino\libraries\NmeaParser" "C:\Users\damir\Documents\Arduino\libraries\I2CDev_ms5611\I2Cdev.cpp" -o "nul" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_PRO -DARDUINO_ARCH_AVR "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\cores\arduino" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\variants\eightanaloginputs" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI\src" "-IC:\Users\damir\Documents\Arduino\libraries\VarioSettings" "-IC:\Users\damir\Documents\Arduino\libraries\I2CDev_ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\vertaccel" "-IC:\Users\damir\Documents\Arduino\libraries\LightInvensense" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\EEPROM\src" "-IC:\Users\damir\Documents\Arduino\libraries\kalmanvert" "-IC:\Users\damir\Documents\Arduino\libraries\beeper" "-IC:\Users\damir\Documents\Arduino\libraries\LPtoneAC" "-IC:\Users\damir\Documents\Arduino\libraries\varioscreen" "-IC:\Users\damir\Documents\Arduino\libraries\digit" "-IC:\Users\damir\Documents\Arduino\libraries\NmeaParser" "C:\Users\damir\Documents\Arduino\libraries\ms5611\ms5611.cpp" -o "nul" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_PRO -DARDUINO_ARCH_AVR "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\cores\arduino" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\variants\eightanaloginputs" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI\src" "-IC:\Users\damir\Documents\Arduino\libraries\VarioSettings" "-IC:\Users\damir\Documents\Arduino\libraries\I2CDev_ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\vertaccel" "-IC:\Users\damir\Documents\Arduino\libraries\LightInvensense" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\EEPROM\src" "-IC:\Users\damir\Documents\Arduino\libraries\kalmanvert" "-IC:\Users\damir\Documents\Arduino\libraries\beeper" "-IC:\Users\damir\Documents\Arduino\libraries\LPtoneAC" "-IC:\Users\damir\Documents\Arduino\libraries\varioscreen" "-IC:\Users\damir\Documents\Arduino\libraries\digit" "-IC:\Users\damir\Documents\Arduino\libraries\NmeaParser" "C:\Users\damir\Documents\Arduino\libraries\vertaccel\vertaccel.cpp" -o "nul" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_PRO -DARDUINO_ARCH_AVR "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\cores\arduino" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\variants\eightanaloginputs" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI\src" "-IC:\Users\damir\Documents\Arduino\libraries\VarioSettings" "-IC:\Users\damir\Documents\Arduino\libraries\I2CDev_ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\vertaccel" "-IC:\Users\damir\Documents\Arduino\libraries\LightInvensense" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\EEPROM\src" "-IC:\Users\damir\Documents\Arduino\libraries\kalmanvert" "-IC:\Users\damir\Documents\Arduino\libraries\beeper" "-IC:\Users\damir\Documents\Arduino\libraries\LPtoneAC" "-IC:\Users\damir\Documents\Arduino\libraries\varioscreen" "-IC:\Users\damir\Documents\Arduino\libraries\digit" "-IC:\Users\damir\Documents\Arduino\libraries\NmeaParser" "C:\Users\damir\Documents\Arduino\libraries\LightInvensense\LightInvensense.cpp" -o "nul" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_PRO -DARDUINO_ARCH_AVR "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\cores\arduino" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\variants\eightanaloginputs" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI\src" "-IC:\Users\damir\Documents\Arduino\libraries\VarioSettings" "-IC:\Users\damir\Documents\Arduino\libraries\I2CDev_ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\vertaccel" "-IC:\Users\damir\Documents\Arduino\libraries\LightInvensense" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\EEPROM\src" "-IC:\Users\damir\Documents\Arduino\libraries\kalmanvert" "-IC:\Users\damir\Documents\Arduino\libraries\beeper" "-IC:\Users\damir\Documents\Arduino\libraries\LPtoneAC" "-IC:\Users\damir\Documents\Arduino\libraries\varioscreen" "-IC:\Users\damir\Documents\Arduino\libraries\digit" "-IC:\Users\damir\Documents\Arduino\libraries\NmeaParser" "C:\Users\damir\Documents\Arduino\libraries\kalmanvert\kalmanvert.cpp" -o "nul" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_PRO -DARDUINO_ARCH_AVR "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\cores\arduino" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\variants\eightanaloginputs" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI\src" "-IC:\Users\damir\Documents\Arduino\libraries\VarioSettings" "-IC:\Users\damir\Documents\Arduino\libraries\I2CDev_ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\vertaccel" "-IC:\Users\damir\Documents\Arduino\libraries\LightInvensense" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\EEPROM\src" "-IC:\Users\damir\Documents\Arduino\libraries\kalmanvert" "-IC:\Users\damir\Documents\Arduino\libraries\beeper" "-IC:\Users\damir\Documents\Arduino\libraries\LPtoneAC" "-IC:\Users\damir\Documents\Arduino\libraries\varioscreen" "-IC:\Users\damir\Documents\Arduino\libraries\digit" "-IC:\Users\damir\Documents\Arduino\libraries\NmeaParser" "C:\Users\damir\Documents\Arduino\libraries\beeper\beeper.cpp" -o "nul" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_PRO -DARDUINO_ARCH_AVR "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\cores\arduino" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\variants\eightanaloginputs" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI\src" "-IC:\Users\damir\Documents\Arduino\libraries\VarioSettings" "-IC:\Users\damir\Documents\Arduino\libraries\I2CDev_ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\vertaccel" "-IC:\Users\damir\Documents\Arduino\libraries\LightInvensense" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\EEPROM\src" "-IC:\Users\damir\Documents\Arduino\libraries\kalmanvert" "-IC:\Users\damir\Documents\Arduino\libraries\beeper" "-IC:\Users\damir\Documents\Arduino\libraries\LPtoneAC" "-IC:\Users\damir\Documents\Arduino\libraries\varioscreen" "-IC:\Users\damir\Documents\Arduino\libraries\digit" "-IC:\Users\damir\Documents\Arduino\libraries\NmeaParser" "C:\Users\damir\Documents\Arduino\libraries\LPtoneAC\toneAC.cpp" -o "nul" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_PRO -DARDUINO_ARCH_AVR "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\cores\arduino" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\variants\eightanaloginputs" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI\src" "-IC:\Users\damir\Documents\Arduino\libraries\VarioSettings" "-IC:\Users\damir\Documents\Arduino\libraries\I2CDev_ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\vertaccel" "-IC:\Users\damir\Documents\Arduino\libraries\LightInvensense" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\EEPROM\src" "-IC:\Users\damir\Documents\Arduino\libraries\kalmanvert" "-IC:\Users\damir\Documents\Arduino\libraries\beeper" "-IC:\Users\damir\Documents\Arduino\libraries\LPtoneAC" "-IC:\Users\damir\Documents\Arduino\libraries\varioscreen" "-IC:\Users\damir\Documents\Arduino\libraries\digit" "-IC:\Users\damir\Documents\Arduino\libraries\NmeaParser" "C:\Users\damir\Documents\Arduino\libraries\varioscreen\varioscreen.cpp" -o "nul" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_PRO -DARDUINO_ARCH_AVR "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\cores\arduino" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\variants\eightanaloginputs" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI\src" "-IC:\Users\damir\Documents\Arduino\libraries\VarioSettings" "-IC:\Users\damir\Documents\Arduino\libraries\I2CDev_ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\vertaccel" "-IC:\Users\damir\Documents\Arduino\libraries\LightInvensense" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\EEPROM\src" "-IC:\Users\damir\Documents\Arduino\libraries\kalmanvert" "-IC:\Users\damir\Documents\Arduino\libraries\beeper" "-IC:\Users\damir\Documents\Arduino\libraries\LPtoneAC" "-IC:\Users\damir\Documents\Arduino\libraries\varioscreen" "-IC:\Users\damir\Documents\Arduino\libraries\digit" "-IC:\Users\damir\Documents\Arduino\libraries\NmeaParser" "C:\Users\damir\Documents\Arduino\libraries\digit\digit.cpp" -o "nul" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_PRO -DARDUINO_ARCH_AVR "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\cores\arduino" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\variants\eightanaloginputs" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI\src" "-IC:\Users\damir\Documents\Arduino\libraries\VarioSettings" "-IC:\Users\damir\Documents\Arduino\libraries\I2CDev_ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\vertaccel" "-IC:\Users\damir\Documents\Arduino\libraries\LightInvensense" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\EEPROM\src" "-IC:\Users\damir\Documents\Arduino\libraries\kalmanvert" "-IC:\Users\damir\Documents\Arduino\libraries\beeper" "-IC:\Users\damir\Documents\Arduino\libraries\LPtoneAC" "-IC:\Users\damir\Documents\Arduino\libraries\varioscreen" "-IC:\Users\damir\Documents\Arduino\libraries\digit" "-IC:\Users\damir\Documents\Arduino\libraries\NmeaParser" "C:\Users\damir\Documents\Arduino\libraries\NmeaParser\NmeaParser.cpp" -o "nul" Generating function prototypes... "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_PRO -DARDUINO_ARCH_AVR "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\cores\arduino" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\variants\eightanaloginputs" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI\src" "-IC:\Users\damir\Documents\Arduino\libraries\VarioSettings" "-IC:\Users\damir\Documents\Arduino\libraries\I2CDev_ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\vertaccel" "-IC:\Users\damir\Documents\Arduino\libraries\LightInvensense" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\EEPROM\src" "-IC:\Users\damir\Documents\Arduino\libraries\kalmanvert" "-IC:\Users\damir\Documents\Arduino\libraries\beeper" "-IC:\Users\damir\Documents\Arduino\libraries\LPtoneAC" "-IC:\Users\damir\Documents\Arduino\libraries\varioscreen" "-IC:\Users\damir\Documents\Arduino\libraries\digit" "-IC:\Users\damir\Documents\Arduino\libraries\NmeaParser" "C:\Users\damir\AppData\Local\Temp\arduino_build_833406\sketch\variometer.ino.cpp" -o "C:\Users\damir\AppData\Local\Temp\arduino_build_833406\preproc\ctags_target_for_gcc_minus_e.cpp" "C:\Program Files (x86)\Arduino\tools-builder\ctags\5.8-arduino10/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\Users\damir\AppData\Local\Temp\arduino_build_833406\preproc\ctags_target_for_gcc_minus_e.cpp" Compiling sketch... "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_PRO -DARDUINO_ARCH_AVR "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\cores\arduino" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\variants\eightanaloginputs" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI\src" "-IC:\Users\damir\Documents\Arduino\libraries\VarioSettings" "-IC:\Users\damir\Documents\Arduino\libraries\I2CDev_ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\vertaccel" "-IC:\Users\damir\Documents\Arduino\libraries\LightInvensense" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\EEPROM\src" "-IC:\Users\damir\Documents\Arduino\libraries\kalmanvert" "-IC:\Users\damir\Documents\Arduino\libraries\beeper" "-IC:\Users\damir\Documents\Arduino\libraries\LPtoneAC" "-IC:\Users\damir\Documents\Arduino\libraries\varioscreen" "-IC:\Users\damir\Documents\Arduino\libraries\digit" "-IC:\Users\damir\Documents\Arduino\libraries\NmeaParser" "C:\Users\damir\AppData\Local\Temp\arduino_build_833406\sketch\NmeaParser.cpp" -o "C:\Users\damir\AppData\Local\Temp\arduino_build_833406\sketch\NmeaParser.cpp.o" "C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_PRO -DARDUINO_ARCH_AVR "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\cores\arduino" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\variants\eightanaloginputs" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI\src" "-IC:\Users\damir\Documents\Arduino\libraries\VarioSettings" "-IC:\Users\damir\Documents\Arduino\libraries\I2CDev_ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\ms5611" "-IC:\Users\damir\Documents\Arduino\libraries\vertaccel" "-IC:\Users\damir\Documents\Arduino\libraries\LightInvensense" "-IC:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\EEPROM\src" "-IC:\Users\damir\Documents\Arduino\libraries\kalmanvert" "-IC:\Users\damir\Documents\Arduino\libraries\beeper" "-IC:\Users\damir\Documents\Arduino\libraries\LPtoneAC" "-IC:\Users\damir\Documents\Arduino\libraries\varioscreen" "-IC:\Users\damir\Documents\Arduino\libraries\digit" "-IC:\Users\damir\Documents\Arduino\libraries\NmeaParser" "C:\Users\damir\AppData\Local\Temp\arduino_build_833406\sketch\variometer.ino.cpp" -o "C:\Users\damir\AppData\Local\Temp\arduino_build_833406\sketch\variometer.ino.cpp.o" variometer:148: error: 'NmeaParser' does not name a type
NmeaParser nmeaParser;
^
variometer:162: error: 'lightfat16' does not name a type
lightfat16 file(SDCARD_CS_PIN);
^
variometer:163: error: 'IGCHeader' does not name a type
IGCHeader header;
^
variometer:164: error: 'IGCSentence' does not name a type
IGCSentence igc;
^
variometer:181: error: 'LxnavSentence' does not name a type
LxnavSentence bluetoothNMEA;
^
C:\Users\damir\Desktop\arduino-variometer-master (1)\arduino-variometer-master\variometer\variometer.ino: In function 'void setup()':
variometer:223: error: 'firmwareUpdateCond' was not declared in this scope
if( firmwareUpdateCond() ) {
variometer:224: error: 'firmwareUpdate' was not declared in this scope
variometer:235: error: 'file' was not declared in this scope
file.enableSPI();
^
variometer:268: error: 'serialNmea' was not declared in this scope
serialNmea.begin(GPS_BLUETOOTH_BAUDS, true);
^
C:\Users\damir\Desktop\arduino-variometer-master (1)\arduino-variometer-master\variometer\variometer.ino: In function 'void loop()':
variometer:363: error: 'bluetoothNMEA' was not declared in this scope
if( bluetoothNMEA.available() ) {
variometer:365: error: 'serialNmea' was not declared in this scope
variometer:367: error: 'serialNmea' was not declared in this scope
variometer:396: error: 'serialNmea' was not declared in this scope
variometer:399: error: 'nmeaParser' was not declared in this scope
variometer:401: error: 'nmeaParser' was not declared in this scope
variometer:411: error: 'file' was not declared in this scope
variometer:411: error: 'igc' was not declared in this scope
variometer:418: error: 'nmeaParser' was not declared in this scope
variometer:420: error: 'serialNmea' was not declared in this scope
variometer:428: error: 'igc' was not declared in this scope
variometer:430: error: 'file' was not declared in this scope
variometer:435: error: 'serialNmea' was not declared in this scope
variometer:461: error: 'nmeaParser' was not declared in this scope
variometer:470: error: 'nmeaParser' was not declared in this scope
variometer:488: error: 'nmeaParser' was not declared in this scope
variometer:527: error: 'nmeaParser' was not declared in this scope
variometer:552: error: 'nmeaParser' was not declared in this scope
if ( nmeaParser.haveNewSpeedValue() ) {
C:\Users\damir\Desktop\arduino-variometer-master (1)\arduino-variometer-master\variometer\variometer.ino: In function 'void createSDCardTrackFile()':
variometer:617: error: 'file' was not declared in this scope
variometer:622: error: 'nmeaParser' was not declared in this scope
variometer:636: error: 'header' was not declared in this scope
Using library SPI at version 1.0 in folder: C:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\SPI Using library VarioSettings in folder: C:\Users\damir\Documents\Arduino\libraries\VarioSettings (legacy) Using library I2CDev_ms5611 in folder: C:\Users\damir\Documents\Arduino\libraries\I2CDev_ms5611 (legacy) Using library ms5611 in folder: C:\Users\damir\Documents\Arduino\libraries\ms5611 (legacy) Using library vertaccel in folder: C:\Users\damir\Documents\Arduino\libraries\vertaccel (legacy) Using library LightInvensense in folder: C:\Users\damir\Documents\Arduino\libraries\LightInvensense (legacy) Using library EEPROM at version 2.0 in folder: C:\Users\damir\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.6.20\libraries\EEPROM Using library kalmanvert in folder: C:\Users\damir\Documents\Arduino\libraries\kalmanvert (legacy) Using library beeper in folder: C:\Users\damir\Documents\Arduino\libraries\beeper (legacy) Using library LPtoneAC in folder: C:\Users\damir\Documents\Arduino\libraries\LPtoneAC (legacy) Using library varioscreen in folder: C:\Users\damir\Documents\Arduino\libraries\varioscreen (legacy) Using library digit in folder: C:\Users\damir\Documents\Arduino\libraries\digit (legacy) Using library NmeaParser in folder: C:\Users\damir\Documents\Arduino\libraries\NmeaParser (legacy) exit status 1 'NmeaParser' does not name a type