The orentation of the sockets should be turned by 180°

prusa3d / MM-control-2.0

Multi Material 2.0 PCB board

Other

36 stars 18 forks source link

The orentation of the sockets should be turned by 180° #2

Open KarlZeilhofer opened 5 years ago

KarlZeilhofer commented 5 years ago

Is there any chance, that the sockets will be turned by 180°?
With the current case of the MMU 2.0 is nearly impossible to unplug the cables when everything is assembled.

ok1hra commented 5 years ago

We do not have the same feeling.

KarlZeilhofer commented 5 years ago

No, why not? I think to remember, that the trouble shooting guide says to use an allen key to unlock the securing pin of the communication plug.

domesticatedviking commented 4 years ago

I very much agree. When using an enclosure, all of the connections to the MMU2 are in a location that can neither be seen nor reached from the front of the printer, and they all require tools to remove. The result is that it is VERY difficult to remove the printer for maintenance. This is why I designed the underslung control panel mod.