search

prusa3d / Original-Prusa-MINI

Original Prusa MINI 3D printer hardware
https://www.prusa3d.com/original-prusa-mini/
GNU General Public License v3.0
429 stars 77 forks source link

Stopping a print causes the printhead to crash into printed part. #11

Closed HenrikPankoke closed 4 years ago

HenrikPankoke commented 4 years ago

I had a print with 6 elements printing individual. The elements is place like the photo. print is from back left to back right. moving to front left to front right plate setup

When printing the front right element I stopped the print. the printhead then moves backwards an into the element behind. causing this to be knocked of the plate. In this case it was a small part and not theat high adhesion. But larger parts with could adhesion could have damage that fan on the printhead. crash

maybe changing stop command to move the nozzle up above highest printed element, before moving in any other direction. or just move nozzle clear of current print and stop movement.

HenrikPankoke commented 4 years ago

Sorry. created this the wrong place. Don't know how to delete. Moved to https://github.com/prusa3d/Prusa-Firmware-Buddy/issues/257

3d-gussner commented 4 years ago

@HenrikPankoke you find a Close issue button below ;-) image

JohnnyDeer commented 4 years ago

I´m closing this issue as duplicate.