search

prusa3d / Original-Prusa-MINI

Original Prusa MINI 3D printer hardware
https://www.prusa3d.com/original-prusa-mini/
GNU General Public License v3.0
428 stars 77 forks source link

putting heatbed to heat with unplugged heatbed heater won't reboot the printer #56

Open kevinpita opened 2 years ago

kevinpita commented 2 years ago

I have seen thomas video and I have done the 3 tests, thermistor tests work ok, but doing the heater one won't work, it should stop heating or reboot the printer, but nothing happens, it just stay 30/80 for example

Prusa-Support commented 2 years ago

Hello! I am sorry for the late response to this issue.

Which submenu selection was selected more precisely? Settings>Temperature>Heatbed Start>Print Preheat>Filament Type

How much time was it staying in the 30/80 screen without preheat error or thermal runaway error? I have to confirm it, but from a check I have done, it would take 4 minutes for thermal runaway on the heatbed to activate. Was it run that way for so long? Would it trigger the error after that time?

Let me know, in case of need we can review this in more detail.

Alessandro Pantaleo Prusa Research