search

prusa3d / Prusa-Firmware-Buddy

Firmware for the Original Prusa MINI, Original Prusa MK4 and the Original Prusa XL 3D printers by Prusa Research.
Other
1.16k stars 229 forks source link

[FEATURE REQUEST] Mini: Display current time on screen #1322

Open reedy opened 3 years ago

reedy commented 3 years ago

If it makes sense, enter what type of printer or upgrade the feature request applies to. Printer type MINI Optional upgrades Filament Runout Sensor

Is your feature request related to an existing problem? Please describe. Partially related to #1321

Describe the expected functionality Display the current time (as per the internal MINI clock) on the display; like would be done on a phone.

It would make issues like #1321 less annoying, as you can see the relative time to the print finishing, based on the internal clock. And you also don't need to go find another device to check the time.

See also: #648 would be another way of not needing this.

Noxmiles commented 3 years ago

Good Idea, but it should have Internet for that. So, in the best case together with the WiFi Upgrade :)

reedy commented 3 years ago

I have mine plugged in via Ethernet ;)

mrog commented 3 years ago

In addition to adding the current time, I'd like to see the remaining time on the screen, too. The current behavior when there's an internet connection is to replace the amount of time remaining (e.g. "Remaining time 1h 52m") with the time of completion (e.g. "Print will end Today at 13:14").

It would be helpful to see the current time, the end time, and the amount of time remaining all at once.

Eldenroot commented 1 year ago

With 4.4.0_RC is possible to use wifi module (I do)... why no feedback from Prusa team?!

Prusa-Support commented 1 year ago

Thank you for sharing your ideas. The issue won't be ignored, it will stay open until our developers will take an action in these regards.

Michele Moramarco Prusa Research

github-actions[bot] commented 5 months ago

This issue has been flagged as stale because it has been open for 60 days with no activity. The issue will be closed in 7 days unless someone removes the "stale" label or adds a comment.

reedy commented 5 months ago

Still valid.

CZDanol commented 5 months ago

I'd say that the main thing preventing us from displaying clock on the mini is that we don't have enough space in the header. It doesn't look like that at the first glance, but we have to keep the space for all the icons, including connect transfer progress.

CZDanol commented 5 months ago

Maybe it could be placed somewhere in the print progress screen?

Prusa-Support commented 5 months ago

Good point, that would require a major UI redesign. Maybe an optional footer would do? 🙂

Michele Moramarco Prusa Research

CZDanol commented 5 months ago

That would be implementable :)

github-actions[bot] commented 3 months ago

This issue has been flagged as stale because it has been open for 60 days with no activity. The issue will be closed in 7 days unless someone removes the "stale" label or adds a comment.

github-actions[bot] commented 3 months ago

This issue has been closed due to lack of recent activity. Please consider opening a new one if needed.