Describe the bug
During the first few layers, the print fan stops at random. Both hotend fans self-test as OK.
The fan speed error can happen during the first few layers when the fan is supposed to be at 0%. The firmware seems to not like the 0% fan setting now.
Workaround: I currently have menu timeout disabled and open the "tune" menu after the print starts. After the "fan not spinning error" happens I can press the "continue" button as the UI reverts to the last open menu. (Since I have the tune menu open, the UI reverts to that, not the home screen.) I then make a print fan speed adjustment so I can see the fan turn back on. One the fan is turned back on, I can resume the print.
Workaround 2: Disable fan checks. (Not ideal.)
In some cases, the above steps have to be taken 2-3 times before the print continues as normal.
How to reproduce
(In my case) Have the print fan at 0% for the first few layers and the print will halt with a recoverable error.
Expected behavior
The fan starts and stops as expected and the fan speed check is done correctly.
Printer type - MINI
Printer firmware version - 4.4.0b1
Original or Custom firmware - Original
Optional upgrades - Runout sensor, bondtech extruder, ESP-01s
USB drive or USB/Octoprint - USB
Describe the bug During the first few layers, the print fan stops at random. Both hotend fans self-test as OK.
The fan speed error can happen during the first few layers when the fan is supposed to be at 0%. The firmware seems to not like the 0% fan setting now.
Workaround: I currently have menu timeout disabled and open the "tune" menu after the print starts. After the "fan not spinning error" happens I can press the "continue" button as the UI reverts to the last open menu. (Since I have the tune menu open, the UI reverts to that, not the home screen.) I then make a print fan speed adjustment so I can see the fan turn back on. One the fan is turned back on, I can resume the print.
Workaround 2: Disable fan checks. (Not ideal.)
In some cases, the above steps have to be taken 2-3 times before the print continues as normal.
How to reproduce (In my case) Have the print fan at 0% for the first few layers and the print will halt with a recoverable error.
Expected behavior The fan starts and stops as expected and the fan speed check is done correctly.
G-code
AllanKey_Wall v1.zip
Crash Dump
I have it, but github will not let me attach it for some reason??
Video
https://youtu.be/UlY2WSc2rA0?t=57