This is the firmware aspect of prusa3d/PrusaSlicer#12151
If it makes sense, enter what type of printer or upgrade the feature request applies to.
Printer type - XL multi-tool
Is your feature request related to an existing problem? Please describe.
When doing a print with filament such as wood fill, the relatively chunky additive particles almost always lead to nozzle cleaning failure on the XL, and/or MBL inaccuracy.
Describe the expected functionality
In conjunction with changes to PrusaSlicer, allow any tool to be used only for probing/MBL. There should be no check as to the nozzle diameter, loaded filament type, or whether filament is loaded or not - any tool is valid for probing/MBL use only. If the tool is also used for printing, then the usual nozzle diameter and filament type checks would apply.
This issue has been flagged as stale because it has been open for 60 days with no activity. The issue will be closed in 7 days unless someone removes the "stale" label or adds a comment.
This is the firmware aspect of prusa3d/PrusaSlicer#12151
If it makes sense, enter what type of printer or upgrade the feature request applies to. Printer type - XL multi-tool
Is your feature request related to an existing problem? Please describe. When doing a print with filament such as wood fill, the relatively chunky additive particles almost always lead to nozzle cleaning failure on the XL, and/or MBL inaccuracy.
Describe the expected functionality In conjunction with changes to PrusaSlicer, allow any tool to be used only for probing/MBL. There should be no check as to the nozzle diameter, loaded filament type, or whether filament is loaded or not - any tool is valid for probing/MBL use only. If the tool is also used for printing, then the usual nozzle diameter and filament type checks would apply.