search

prusa3d / Prusa-Firmware-Buddy

Firmware for the Original Prusa MINI, Original Prusa MK4 and the Original Prusa XL 3D printers by Prusa Research.
Other
1.04k stars 209 forks source link

[BUG] Material in Footer of MK4 not updated during multi-material print with MMU3 #3936

Open unclej84 opened 3 weeks ago

unclej84 commented 3 weeks ago

Printer type - [MK4]

Printer firmware version - [6.0.0]

Original or Custom firmware - [Original]

Optional upgrades - [MMU3]

USB drive or USB/Octoprint USB drive

Describe the bug During a multi-material print with the MMU3 the material in the footer does not get updated according to currently used material although it was correctly defined by advanced loading

How to reproduce Define multi-material print for MK4 with MMU3 using PETG in slot 1 and PLA in slot 2 - footer always stays at the same/first material

Expected behavior Display currently used material - when slot 1 is in use, display "PETG" - when slot 2 is in use, display "PLA"

G-code top-bolt-x-2_0.4n_0.2mm_PETG,PLA_MK4ISMMU3_1h16m.zip - contains 3mf project and sliced bgcode file

VladaDHS commented 2 weeks ago

Have same issue. all Fialments are PLA but down is shown PETG.