Printer
Mk3.5
Original FW 6.0.0
Prusa Mk3S to Mk3.5 Upgrade Kit (Standard)
USB Drive
Problem
If an object on the print bed extends beyond about X = 180mm (or so), then Auto Mesh Levelling will fail.
After AutoHome, the printhead will travel to XMAX placing the PINDA probe beyond the printbed.
Moving to the first Mesh probe point, the first probe will try to drive the nozzle through the printbed, generating a Failure.
Mimic
Place any object on the furthest right limit (XMAX), and slice with PrusaSlicer 2.7.4.
Save bGCode and Print.
Expected behavior
It should have printed.
I consider the PINDA X Offset might be involved? Or not contemplated by the new Mesh algorithm?
Printer Mk3.5 Original FW 6.0.0 Prusa Mk3S to Mk3.5 Upgrade Kit (Standard) USB Drive
Problem If an object on the print bed extends beyond about X = 180mm (or so), then Auto Mesh Levelling will fail. After AutoHome, the printhead will travel to XMAX placing the PINDA probe beyond the printbed. Moving to the first Mesh probe point, the first probe will try to drive the nozzle through the printbed, generating a Failure.
Mimic Place any object on the furthest right limit (XMAX), and slice with PrusaSlicer 2.7.4. Save bGCode and Print.
Expected behavior It should have printed. I consider the PINDA X Offset might be involved? Or not contemplated by the new Mesh algorithm?
G-code PS generates BGCode (not supported by GitHub), so file attached as .ZIP fuse3 Mk3.5_0.4n_0.2mm_PLA_MK3.5_5h21m.zip