search

prusa3d / Prusa-Firmware-ESP32-Cam

Firmware for ESP32 Cam modules to be used in Prusa Connect
GNU General Public License v3.0
193 stars 19 forks source link

Struggling with ESP32-CAM flashing #56

Open K5OZ opened 3 months ago

K5OZ commented 3 months ago

Hello gurus' I am having troubles using the Esppressif Flash Download Tool. I think I set up everything per Miroslav's PDF step by step file; however, all I get when trying to perform the Erase Step is an error. See attached for the error and setup. Thanks, Dave ESP32 Progam issue

johnyHV commented 3 months ago

Hello @K5OZ . You are selected MCU ESP8266 and not ESP32. It's necessary use ESP32 MCU type in the ESP32 FLASH tool.

how to flash chip select

K5OZ commented 3 months ago

Miroslav,Thanks for the quick response!   Yes, I selected ESP32 for the MCU.Sent from my iPhoneOn Aug 3, 2024, at 11:22 AM, Miroslav Pivovarsky @.***> wrote: Hello @K5OZ . You are selected MCU ESP8266 and not ESP32. It's necessary use ESP32 MCU type in the ESP32 FLASH tool. how.to.flash.chip.select.jpg (view on web)

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: @.***>

johnyHV commented 3 months ago

No. In the log is selected ESP8266

image

K5OZ commented 3 months ago

Miroslav,Found the issue; I had multiple windows of the flashing tool open and didn’t notice them. When I went to flash it was an old window that had the wrong setup in it.  Killed all programs and started anew and was able to erase and flash it.  Now I am having issues with Prusa Connect seeing the images.  Camera shows registration and connected on Prusa Connect. Will be researching that next.Thanks for your help!DaveSent from my iPadOn Aug 3, 2024, at 3:20 PM, Miroslav Pivovarsky @.***> wrote: No. In the log is selected ESP8266 image.png (view on web)

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: @.***>

johnyHV commented 2 months ago

@K5OZ can you send me log file from micro SD card ?

K5OZ commented 2 months ago

Miroslav,Unfortunately, I am not home now and I didn’t put a SD card in the ESP32 CAM when I programmed it.   When I get back I will insert a card and redo the programming.Thanks againDaveSent from my iPadOn Aug 5, 2024, at 11:07 AM, Miroslav Pivovarsky @.***> wrote: @K5OZ can you send me log file from micro SD card ?

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: @.***>