3d-gussner
commented
12 months ago @PTW-105 This is the repository for the Prusa MK2.5/S and MK3/S/+ please open a new ticket here https://github.com/prusa3d/Prusa-Firmware-Buddy
Closed PTW-105 closed 12 months ago
3d-gussner
commented
12 months ago @PTW-105 This is the repository for the Prusa MK2.5/S and MK3/S/+ please open a new ticket here https://github.com/prusa3d/Prusa-Firmware-Buddy
Printer type - MK4 Printer firmware version - 5.1.0-alpha2+13126
MMU upgrade - N/A - No MMU MMU upgrade firmware version - N/A
SD card or USB/Octoprint USB drive directly connected to MK4
Describe the bug While printing a 42-hour print, I returned to the MK4 beeping with a blue screen with a title of precise_stepping.cpp:447. This gcode file was produced using PrusaSlicer 2.7.0-alpha1-win64. BIN crash dump from the printer and a photo of the error that was displayed on screen are attached to this report. The g-code file is too large to attach here (31MB) but is available upon request. This is the first time I have observed this BSOD issue and first time I have tried printing this g-code file.
To Reproduce Print g-code file (too large to attach, but available upon request) from USB drive connected to MK4 running firmware 5.1.0-alpha2+13126 and wait to see if BSOD occurs.
Expected behavior I expected the provided g-code file to print successfully.
G-code BIN crash dump and photo of the displayed error are attached to this report. Unfortunately, g-code file is 31MB and too large to attach. Please contact directly with alternate transfer method.
Video No video is available for this error, however a photo of the BSOD error screen is attached.