Printer type - MK3S (all stock)
Printer firmware version - 3.13.2
Describe the bug
Printer stopped with "Mintemp bed fixed, restart printer" error, on average during prints lasting a few hours, generally after 1 hour and a half - 2 hours. I then tested the thermistor and found no problems. I installed the 3.13.1 firmware and the prints finish correctly even after 7-8 hours.
To Reproduce
Print pieces that require at least 3 hours of printing and that cover at least 50% of the table.
I use PLA 210/65.
The printer is in a normal room in the house, 20° C costant, no problem before updating to 3.13.2
Printer type - MK3S (all stock) Printer firmware version - 3.13.2
Describe the bug Printer stopped with "Mintemp bed fixed, restart printer" error, on average during prints lasting a few hours, generally after 1 hour and a half - 2 hours. I then tested the thermistor and found no problems. I installed the 3.13.1 firmware and the prints finish correctly even after 7-8 hours.
To Reproduce Print pieces that require at least 3 hours of printing and that cover at least 50% of the table. I use PLA 210/65.
The printer is in a normal room in the house, 20° C costant, no problem before updating to 3.13.2