Open Sk4nk-Hunt opened 1 week ago
@Sk4nk-Hunt This is the MK3/S/+, MK2.5/S repository, as you refer to the XL please close this issue here and reopen it in the 32-bit MINI, MK3.5, MK3.9, MK4, XL repository https://github.com/prusa3d/Prusa-Firmware-Buddy
Printer type - [Prusa Connect/ XL] Printer firmware version - [6.0.0]
USB
Describe the bug In Connect.prusa (prusaLink) If you have a hollow object like a cylinder and place a smaller object in the hole/gap of the cylinder. IN Prusa Connect when you go to cancel objects THE inner object inside the cylinder is not visible. To Reproduce -Create cylinder with a center hole. -Within the cylinder create a smaller object with in that hole/gap -Send to XL printer -Start Print -Select the tab/ section where it allows you to cancel object inside of Prusa Connect of the current print. -Notice how the inner object Is not visible properly inside the cylinder. -Cancel Cylinder object -Revealing the Smaller object within also not being able to select with mouse inner objects.
Expected behavior The cylinder is being acted in an outline for but the Slicer or Prusa Connect is not considering the gap as a negative value to properly display it inside the Cancel objects section. It sees it as only a solid object.
G-code None
Video https://we.tl/t-JRrsCragOP