search

prusa3d / Prusa-Link-Web

Prusa Web interface resources
GNU General Public License v3.0
114 stars 50 forks source link

Nozzle Diameter is reported incorrectly. #448

Open BrienKing opened 8 months ago

BrienKing commented 8 months ago

It shows it as .40 mm when I have the .6 installed and the part printed was sliced with .6.

image

darraghbr commented 7 months ago

Depending on what machine this is you need to set the nozzle diameter in the menu of the printer. I know on the MK3 it's in the 'HW setup' menu and on the MK4 I think it's in 'Settings - Hardware'.

BrienKing commented 7 months ago

Yes, it was set in the menu.

darraghbr commented 7 months ago

I think it might be helpful if you specified which printer you were using?

It's currently working fine on both my MK3S and my Mini.

image

BrienKing commented 7 months ago

XL

xnk commented 7 months ago

In my case PrusaLink seems to report the nozzle diameter of the first extruder (0.8mm) even when printing with any of the other four extruders (with 0.4mm nozzles) on the 5T XL.

Gefionious commented 6 months ago

I have the same problem. I installed 0.4mm nozzles on my XL-2T (both tool heads), went into the menu on the printer and selected 0.4mm and PrusaLink still stubbornly reports I have 0.6mm nozzles installed.

Gefionious commented 6 months ago

Quick update on my side, this issue continues even with the latest firmware on the XL (5.1.2?). This includes using the new calibration process to select the nozzle size of 0.4mm for both tools. PrusaLink still reports 0.6mm nozzles incorrectly on both toolheads.