TojikCZ
commented
1 year ago Hi, If I understand correctly, this is a whole layout re-structure request with some feature requests on top of that. And it does not mention which printer is this meant for. I assume MK4, because the three has some of these requested things already. This is not a correct way to submit an issue on github, but there are some ideas that might be worth exploring
Hello I was looking at the Dashboard and I'm not sure if this has been suggested yet.
Main page Dashboard Tab ------ Storage Tab ------ Printer Tab ------- Network Settings ------ Firmware Setting ------ Error Logs
Under the Printer Tab could have:
Heat Setting Heat Adjustments Nozzle - With just a Textbox or dial button Heat Adjustments Print Bed - With just a Textbox or dial button
Print Speed Nozzle Flow Rate Speed (on the machine menu Speed) -With just a Textbox or dial button Flow Speed - With just a Textbox or dial button
Fan Speed Adjustment Print Fan - With just a Textbox or dial button
Printer General Setting Change Filament - Yes or no radiobutton Live Z Adjustment - Sub-menu
Apply or Save or Cancel button
Sound Settings - Sub-menu
Apply or Save or Cancel button this can be for the hole tab.
Under the Network Settings
Ethernet Displays TCP/IP IP Address IPv4: 10.0.0.110 IPv6: fe80::a6b2:d761:c619:618c%17 Subnet mask : 255.255.255.0 Default Gateway: 10.0.0.1 Mac address: Connection Type: DHCP Change Connection Type - Yes or No Radiobutton (default set to no) ->Sub-menu Connection Type - Drop down box - (Automatic - DHCP / Manual IP Address IPv4: - Textbox IPv6: - if known - Textbox Subnet mask : - Textbox Default Gateway: Textbox
Wifi Displays TCP/IP IP Address IPv4: 10.0.0.110 IPv6: fe80::a6b2:d761:c619:618c%17 Subnet mask : 255.255.255.0 Default Gateway: 10.0.0.1 Mac address: Connection Type: DHCP Change Connection Type - Yes or No Radiobutton (default set to no) ->Sub-menu Connection Type - Drop down box - (Automatic - DHCP / Manual IP Address IPv4: - Textbox IPv6: - if known - Textbox Subnet mask : - Textbox Default Gateway: Textbox
Apply or Save or Cancel button
Under Firmware Setting Firmware Update - Browse button (to locate the files locally on the users computer) Auto Update - Yes or No Radio button
Apply or Save or Cancel button
Under the Error Log Tab it could display things such as any error codes, thermal run away. and also perhaps generate a QR Code or perhaps the ability to send off to the support team.
That is the only thing I can think of at the moment in time. It be nice to have these settings available esp if you are not home and you are using OctoPrint to monitor your job. This would give the users the chance to adjust on the fly esp. if they see something that is not right.
Thank you for your time.