search

prusa3d / Prusa3D-Test-Objects

Testing and calibration objects/gcodes.
31 stars 12 forks source link

📑Report: Seam test results #10

Open 3d-gussner opened 4 years ago

3d-gussner commented 4 years ago

Please report here your Seam test results. [UPDATE] Please try rate how they look like but also how they "feel" like (haptic). Seam_test_v1.1.3mf.zip

Feel free to write additional information you want to share.

I will try to update following table so everyone can see what results we got from the community.

Printer MMU PFW MFW K value Near Rand Align Rear User
MK3s MMU2 3.8.1 1.0.6 39 6.5 6 6.5 6.5 Average
MK3s MMU2 3.9.0-RC3 1.0.6 39 +1 +0.5 +0.5 0 Average
MK3s MMU2 3.9.0-RC3 1.0.6 0.105 +1 +1 +1 +0.5 Average
MK3s N/A 3.8.1 N/A 33 7 7 7 7 Vossberger
MK3s N/A 3.9.0-RC3 N/A 33 +1 0 +1 0 Vossberger
MK3s N/A 3.9.0-RC3 N/A 0.07 +1 +1 +1 0 Vossberger
MK3s N/A 3.8.1 N/A 41 6 5 6 6 mmuellerphoto
MK3s N/A 3.9.0-RC3 N/A 41 +1 +1 0 0 mmuellerphoto
MK3s N/A 3.9.0-RC3 N/A 0.14 +1 +1 +1 +1 mmuellerphoto
3d-gussner commented 4 years ago

Example report from user: I tested on Mk3s 3.8.1 no mmu with K45 Nearest=8 Rand=7 Aligned=8 Rear=7 3.9.0-RC3 with K45 Nearest=8 Rand=7 Aligned=8 Rear=7 3.9.0-RC3 with K0.2 Nearest=8 Rand=7 Aligned=8 Rear=7

3d-gussner commented 4 years ago

Copy of @Vossberger results

I tested MK3s no MMU with FilamentumPM (PLA Orange) via SD-Card directly 3.8.1 with K33 Nearest=7 Rand=7 Aligned=7 Rear=7 3.9.0-RC3 with K33 Nearest=8 Rand=7 Aligned=8 Rear=7 3.9.0-RC3 with K0.07 Nearest=8 Rand=8 Aligned=8 Rear=7 (included Photos are not the best ...) Dokument1.pdf

3d-gussner commented 4 years ago

Copy of @mmuellerphoto results

I tested Prusa Mk3s, no MMU, Redline Filament PLA Silver, Ruby Nozzle, SD-Card 3.8.1 with K41 Nearest=6 Rand=5 Aligned=6 Rear=6 3.9.0-RC3 with K41 Nearest=7 Rand=6 Aligned=6 Rear=6 3.9.0-RC3 with K0.14 Nearest=7 Rand=6 Aligned=7 Rear=7

Attached an image of the 3.9.0-RC3 with K0.14 Test ... IMG_3667