My plan is to use inkscape to design and creat the G-code. With pronterface I will sent it to the laser cutter. My plan is to get the marlin software to work like in this video: https://www.youtube.com/watch?v=VNqytJqoE1w. Afther that I will orther the laser cutting machine.
For now I have the folowing issue:
Im using stepper motors . They are working when I connect to Pronterface. I can controle the motors when im using pronterface. But when I load a g-code file, that I designed with inkscape, the program seems to frees. Nothing happends. Its saying: locking interface. When i unlock it and sent a manuel G-code its not working. The program thinks its working at that moment. The picture that I design is visualize in the G-code viewer from pronterface.
I haven connected no extruders, fan ore bed to the Ramps 1.4. I have connected one thermister and one endstop. Both are working well. When i upload the Marlin software there are no problems.
My thoughts:
Is my problem that het program is waiting for the extruder to get warm? Is there something wrong with te G-code I’am sending tot the Rampsboard.
Below i will put the info form pronterface when i connect, the G-code that im using en the configuration.h file form the marlin software.
I hope my english writing is understandable, english is not my first language. Thank for all your reactie and the time you are takeing to look at the messige.
Hello Everybody
My name is Bart. At home im working on a Lasercutter. I’m using the Ramps 1.4 and marlin software. To make the Marlin software work with a laser i’m inspired by this blog from dreammakercnc: http://dreammakercnc.blogspot.com/2015/06/marlin-firmware-modification-for-laser.html
My plan is to use inkscape to design and creat the G-code. With pronterface I will sent it to the laser cutter. My plan is to get the marlin software to work like in this video: https://www.youtube.com/watch?v=VNqytJqoE1w. Afther that I will orther the laser cutting machine.
For now I have the folowing issue: Im using stepper motors . They are working when I connect to Pronterface. I can controle the motors when im using pronterface. But when I load a g-code file, that I designed with inkscape, the program seems to frees. Nothing happends. Its saying: locking interface. When i unlock it and sent a manuel G-code its not working. The program thinks its working at that moment. The picture that I design is visualize in the G-code viewer from pronterface.
I haven connected no extruders, fan ore bed to the Ramps 1.4. I have connected one thermister and one endstop. Both are working well. When i upload the Marlin software there are no problems.
My thoughts: Is my problem that het program is waiting for the extruder to get warm? Is there something wrong with te G-code I’am sending tot the Rampsboard.
Below i will put the info form pronterface when i connect, the G-code that im using en the configuration.h file form the marlin software.
I hope my english writing is understandable, english is not my first language. Thank for all your reactie and the time you are takeing to look at the messige.
Pronterface connecting Connecting... start Printer is now online. echo: External Reset Marlin 1.0.2+ echo: Last Updated: Jun 6 2019 22:04:53 | Author: (Bart,24-1-2019) Compiled: Jun 6 2019 echo: Free Memory: 5248 PlannerBufferBytes: 1360 echo:Hardcoded Default Settings Loaded echo:Steps per unit: echo: M92 X78.74 Y78.74 Z533.33 E836.00 echo:Maximum feedrates (mm/s): echo: M203 X500.00 Y500.00 Z5.00 E25.00 echo:Maximum Acceleration (mm/s2): echo: M201 X9000 Y9000 Z100 E10000 echo:Acceleration: S=acceleration, T=retract acceleration echo: M204 S3000.00 T3000.00 echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s) echo: M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00 echo:Home offset (mm): echo: M206 X0.00 Y0.00 Z0.00 echo:PID settings: echo: M301 P22.20 I1.08 D114.00
G-code Loading file: D:\output_0001.gcode Loaded D:\output_0001.gcode, 27 lines 0.00mm of filament used in this print The print goes: