prusa3d-bb
commented
6 years ago hello For this you would need to go to prusacontrol.org there is a form on the site for submitting errors as it is in a beta state. Thank you
— ShaneTechnical Support
PRUSA Research +420 222 263 718 +421 220 570 305 188/7a Partyzánská, 17000, Prague shop.prusa3D.com
For simple troubleshooting, please use: http://help.prusa3d.com
Please rate our reply ...be generous :-)
--- original message --- On Tue, Mar 20, 2018 at 04:45 pm, notifications@github.com NLSEngineering wrote:
here is the contents of the log file.
[ERROR][main.py:95:log_exception()]-Logging an uncaught exception
Traceback (most recent call last):
File "main.py", line 193, in
File "main.py", line 159, in main
File "controller.py", line 65, in init
File "parameters.py", line 356, in init
File "parameters.py", line 459, in download_new_settings_files
File "jsoninit.py", line 268, in load
File "jsoninit.py", line 319, in loads
File "json\decoder.py", line 339, in decode
File "json\decoder.py", line 357, in raw_decode
json.decoder.JSONDecodeError: Expecting value: line 1 column 1 (char 0)
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub, or mute the thread. --- end of original message ---
here is the contents of the log file.
[ERROR][main.py:95:log_exception()]-Logging an uncaught exception Traceback (most recent call last): File "main.py", line 193, in
File "main.py", line 159, in main
File "controller.py", line 65, in init
File "parameters.py", line 356, in init
File "parameters.py", line 459, in download_new_settings_files
File "json__init.py", line 268, in load
File "json\init__.py", line 319, in loads
File "json\decoder.py", line 339, in decode
File "json\decoder.py", line 357, in raw_decode
json.decoder.JSONDecodeError: Expecting value: line 1 column 1 (char 0)