Open ifohancroft opened 4 months ago
I am afraid this is not enough to add that printer. There is only one basic printer/filament/print profile called "Kobra2-PLA Parameter", also the way it was added to the ini file (copy/paste with all keys from exported bundle) is not ideal for future maintenance.
I am afraid this is not enough to add that printer. There is only one basic printer/filament/print profile called "Kobra2-PLA Parameter"
Unfortunately, that is all that Anycubic provides for the printer for PrusaSlicer. What more would you say is needed?
The way it was added to the ini file (copy/paste with all keys from exported bundle) is not ideal for future maintenance.
Would you please elaborate on that?
More print profiles (for example different layer heights). At least some basic filament profiles (PLA/PETG). Those profiles should be tested/tuned on actual printer. Basically what would you expect as an owner of such printer and what can you usually see with other bundled printers.
It's basically described here https://github.com/prusa3d/PrusaSlicer/wiki/Vendor-bundles-and-updating-process. Using some inheritance, possibly some existing presets, etc. Anycubic bundle is already quite problematic, because it contains different profiles from different authors.
More print profiles (for example different layer heights). At least some basic filament profiles (PLA/PETG). Those profiles should be tested/tuned on actual printer. Basically what would you expect as an owner of such printer and what can you usually see with other bundled printers.
It's basically described here https://github.com/prusa3d/PrusaSlicer/wiki/Vendor-bundles-and-updating-process. Using some inheritance, possibly some existing presets, etc. Anycubic bundle is already quite problematic, because it contains different profiles from different authors.
Thank you! I would look into that in the following days.
Any and all the Kobra 2 files and settings are taken from those provided by Anycubic for the Kobra 2 for PrusaSlicer.
The following has been changed from what Anycubic has provided:
print_settings_id
,filament_settings_id
,printer_settings_id
andpost_process
to empty, to match the rest of the Anycubic printers in the ini.