search

prusa3d / PrusaSlicer-settings

Prusa3D specific settings for the Slic3r Prusa Edition
GNU Affero General Public License v3.0
357 stars 203 forks source link

add the 0.30 Printer settings profile #251

Closed cgerrist closed 1 week ago

cgerrist commented 4 months ago

Hello,

In the mk3s 0.40 printer settings I had the 0.30 Printer Settings profile. This was an perfect setting for speed and quality. Could this profile add in the next release?

Chris Gerrist

cgerrist commented 4 months ago

I forgot to write my printer version. I have a mk3.5 printer

rtyr commented 4 months ago

It made sense on MK3S, but not so much on MK3.5, since even 0.20 SPEED already prints so fast, that it is close to the volumetric speed limits of the hotend (how fast can be filament melted). 0.3 layer height would need to be printed much slower.

cgerrist commented 4 months ago

Hi,

Today I made a print profile 0.30 for the 0.4 nozzle. Same as the Prusa mk3s profile. The print looks beautiful. I didn’t had any problems at all.

Chris Gerrist

On 23 Apr 2024, at 07:19, Roman Tyr @.***> wrote:

It made sense on MK3S, but not so much on MK3.5, since even 0.20 SPEED already prints so fast, that it is close to the volumetric speed limits of the hotend (how fast can be filament melted). 0.3 layer height would need to be printed much slower.

— Reply to this email directly, view it on GitHub https://github.com/prusa3d/PrusaSlicer-settings/issues/251#issuecomment-2071427939, or unsubscribe https://github.com/notifications/unsubscribe-auth/AABO7CXDLNPO77JKKULA4BLY6XVNNAVCNFSM6AAAAABGRJYFNGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANZRGQZDOOJTHE. You are receiving this because you authored the thread.

rtyr commented 4 months ago

It will print fine, but slower. The speed is limited automatically by volumetric speed limit.

rtyr commented 1 week ago

more layer heights were added for high-flow nozzle profile variants