Ender 3 max bed size

[raptorslegacy]

Hello,

Can somebody modify the bed on the ender 3 max profile?, it is set to 290 x 290 which is wrong it should be 300 x 300, as the bed is 300 by 310 , 310 becaus those 10 are were the clams are positioned. Thank you in advance

[rtyr]

FYI @pmjdebruijn

[Prusa-Support]

Here you can adjust the bed size on your printer profile.

James Dougherty Prusa Research

[pmjdebruijn]

As noted, there's an offset of 5mm all round the bed, to make sure users are unlikely to ever print off the bed, if there's any alignment issues.

[pmjdebruijn]

@raptorslegacy would you mind printing the following object (disable Skirt and don't change default model placement), and post a photo with the print still attached to the print bed.

bed_alignment_288.zip

[raptorslegacy]

Hello, sure as soon as i get home, i will do it asap :D, and post a picture here

[raptorslegacy]

Here ya go

[pmjdebruijn]

Ok that seems perfect, as I do want to keep that safety zone around the edge, so we'll keep it at 290x290 usable area.

That said, the bed model can use some adjustments...

@rtyr, for 2.6, you could add this:

ender3max_bed.zip

[printer_model:ENDER3MAX] bed_model = ender3max_bed.stl bed_texture = ender3max.svg

[printer_model:ENDER3MAXNEO] bed_model = ender3max_bed.stl bed_texture = ender3max.svg

[raptorslegacy]

Undestood, i brought the issue up frond as the CR10V2 has the bed set to 300 by 300 and the bed is the same x = 300 y = 310

[pmjdebruijn]

Do you own a CR10V2 as well then?

[raptorslegacy]

Yes, otherwise i would not have posted , they thing was that i wanted to print 2 things that are big and the cr10v2 was all good no issue and then when i swapped to ender 3 max , prusa said printer bed to small and i was....really :| but how it's the same bed, same clamps, was i missing something?

[pmjdebruijn]

@rtyr hold on, let me do some more digging...