Gcode_erroor

[NunoFilipePereira]

Description of the bug

Project file & How to reproduce

;STARTGCODE M117 Initializing ; Set coordinate modes G90 ; use absolute coordinates M83 ; extruder relative mode ; Reset speed and extrusion rates M200 D0 ; disable volumetric E M220 S100 ; reset speed ; Set initial warmup temps M117 Nozzle preheat M104 S100 ; preheat extruder to no ooze temp M140 S[first_layer_bed_temperature] ; set bed temp M190 S[first_layer_bed_temperature] ; wait for bed final temp M300 S40 P10 ; Bip ; Home M117 Homing G28 ; home all with default mesh bed level ; For ABL users put G29 for a leveling request ; Final warmup routine M117 Final warmup M104 S[first_layer_temperature] ; set extruder final temp M109 S[first_layer_temperature] ; wait for extruder final temp M190 S[first_layer_bed_temperature] ; wait for bed final temp M300 S440 P200 ; 1st beep for printer ready and allow some time to clean nozzle M300 S0 P250 ; wait between dual beep M300 S440 P200 ; 2nd beep for printer ready G4 S10 ; wait to clean the nozzle M300 S440 P200 ; 3rd beep for ready to start printing ; Prime line routine M117 Printing prime line ;M900 K0; Disable Linear Advance (Marlin) for prime line G92 E0.0; reset extrusion distance G1 X-54.672 Y-95.203 Z0.3 F4000; go outside print area G92 E0.0; reset extrusion distance G1 E2 F1000 ; de-retract and push ooze G3 X38.904 Y-102.668 I54.672 J95.105 E20.999 G3 X54.671 Y-95.203 I-38.815 J102.373 E5.45800 G92 E0.0 G1 E-5 F3000 ; retract 5mm G1 X52.931 Y-96.185 F1000 ; wipe G1 X50.985 Y-97.231 F1000 ; wipe G1 X49.018 Y-98.238 F1000 ; wipe G1 X0 Y-109.798 F1000 G1 E4.8 F1500; de-retract G92 E0.0 ; reset extrusion distance ; Final print adjustments M117 Preparing to print ;M82 ; extruder absolute mode M221 S{if layer_height<0.075}100{else}95{endif} M300 S40 P10 ; chirp M117 Print [input_filename]; Display: Printing started...

Checklist of files included above

• [X] Project file
• [X] Screenshot

Version of PrusaSlicer

2.7.0

Operating system

Mac

Printer model

Flsun qqs pro

[neophyl]

Try using the correct placeholder [input_filename_base] Please see https://help.prusa3d.com/article/list-of-placeholders_205643

[NunoFilipePereira]

Try using the correct placeholder [input_filename_base] Please see https://help.prusa3d.com/article/list-of-placeholders_205643

What is the relationship with the error?

[NunoFilipePereira]

Sorted out. Thanks

[Alpine03]

Thank you for your help. placeholder [input_filename_base] was the solution. "base" was missing