Open mahornak opened 11 months ago
YuSanka
commented
11 months ago Thanks for your report. But I can't reproduce your issue. A short video or more detailed steps to repro would be very helpful. Nevertheless, I don't understand how could you change a first color from color bund, when it's impossible action. We don't allow to change a first color. First color in bund is always filament or extruder color.
mahornak
commented
11 months ago Oleksandra,
Hello. I've attached a screen grab of the online manual for PrusaSlicer. In this section it tells you how you can alter a color for a new color change that is added. I can add color changes easily enough. However, the colors produced are standard and not what I really want. So, I right click anywhere in the new color bar and the software freezes. I have to hit ESC to unfreeze PrusaSlicer, I can change the first (bottom) color by selecting the filament color block but not the others (see attachments). Please help me. Thanks.
Mark
On Fri, Dec 22, 2023 at 9:47 AM Oleksandra Yushchenko < @.***> wrote:
Thanks for your report. But I can't reproduce your issue. A short video or more detailed steps to repro would be very helpful. Nevertheless, I don't understand how could you change a first color from color bund, when it's impossible action. We don't allow to change a first color. First color in bund is always filament or extruder color.
— Reply to this email directly, view it on GitHub https://github.com/prusa3d/PrusaSlicer/issues/11924#issuecomment-1867772726, or unsubscribe https://github.com/notifications/unsubscribe-auth/BEXBBUWMJA5JWZU6SMPVEFDYKWMQLAVCNFSM6AAAAABAXXTM3WVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQNRXG43TENZSGY . You are receiving this because you authored the thread.Message ID: @.***>
YuSanka
commented
11 months ago @mahornak , unfortunately, your attachments wasn't added. Please, resend them.
mahornak
commented
11 months ago Oleksandra,
Here are the photos again. Thanks.
Mark
On Fri, Jan 5, 2024 at 9:53 AM Oleksandra Yushchenko < @.***> wrote:
@mahornak https://github.com/mahornak , unfortunately, your attachments wasn't added. Please, resend them.
— Reply to this email directly, view it on GitHub https://github.com/prusa3d/PrusaSlicer/issues/11924#issuecomment-1878801935, or unsubscribe https://github.com/notifications/unsubscribe-auth/BEXBBUUCAEXVPQ2DCFSJP33YNAHXDAVCNFSM6AAAAABAXXTM3WVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQNZYHAYDCOJTGU . You are receiving this because you were mentioned.Message ID: @.***>
YuSanka
commented
10 months ago @mahornak But still nothing :)
mahornak
commented
10 months ago Oleksandra,
This is very frustrating. I've attached photos to the last 2 emails I sent you. You must have an anti-virus program that is deleting them. I've added them to Google Drive and sent them to your email address. I've also added the link here.
https://drive.google.com/drive/folders/18ANLrk2dkRDjJKOh_s-tTx2clStXcsiN?usp=drive_link
I will also try pasting the photos in this email below.
[image: PrusaSlicer - color change problem.jpg]
[image: PrusaSlicer - cannot modify color change color.jpg]
Hopefully one of these attempts of getting you the photos will work. Please let me know. Thanks,
Mark
On Wed, Jan 10, 2024 at 6:16 AM Oleksandra Yushchenko < @.***> wrote:
@mahornak https://github.com/mahornak But still nothing :)
— Reply to this email directly, view it on GitHub https://github.com/prusa3d/PrusaSlicer/issues/11924#issuecomment-1884652761, or unsubscribe https://github.com/notifications/unsubscribe-auth/BEXBBUX7YKT4NDVVY4JCBPLYNZ2BNAVCNFSM6AAAAABAXXTM3WVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQOBUGY2TENZWGE . You are receiving this because you were mentioned.Message ID: @.***>
Jan-Soustruznik
commented
10 months ago Hello, @mahornak ,
this is limitation of the github web page, I think. I tried use the google drive link, but we dont have a permission to download. Could you change the permission, please. Thank you
mahornak
commented
10 months ago I've shared an item with you:
PrusaSlicer - color change problem.jpg https://drive.google.com/file/d/1TqtaJPDknatYsIEDy58sMNAoeEhDV0iW/view?usp=sharing&invite=CPuAjOoO&ts=65a6d2e2
It's not an attachment -- it's stored online. To open this item, just click
the link above.
mahornak
commented
10 months ago I found your access requests to my Google Drive folder and granted access. Hopefully you can see my documents now. Thanks for your patience.
Mark
On Tue, Jan 16, 2024 at 9:13 AM Jan Soustružník @.***> wrote:
Hello, @mahornak https://github.com/mahornak ,
this is limitation of the github web page, I think. I tried use the google drive link, but we dont have a permission to download. Could you change the permission, please. Thank you
— Reply to this email directly, view it on GitHub https://github.com/prusa3d/PrusaSlicer/issues/11924#issuecomment-1893828222, or unsubscribe https://github.com/notifications/unsubscribe-auth/BEXBBUU2PYNAVWKSJF2W2KTYO2DJBAVCNFSM6AAAAABAXXTM3WVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQOJTHAZDQMRSGI . You are receiving this because you were mentioned.Message ID: @.***>
mahornak
commented
9 months ago Thanks for fixing the color selection bug in PrusaSlicer! I see that the color selection menu was opening up off of the screen. It works now. Thanks again.
Mark
On Tue, Jan 16, 2024 at 2:06 PM Mark Hornak @.***> wrote:
I found your access requests to my Google Drive folder and granted access. Hopefully you can see my documents now. Thanks for your patience.
Mark
On Tue, Jan 16, 2024 at 9:13 AM Jan Soustružník @.***> wrote:
Hello, @mahornak https://github.com/mahornak ,
this is limitation of the github web page, I think. I tried use the google drive link, but we dont have a permission to download. Could you change the permission, please. Thank you
— Reply to this email directly, view it on GitHub https://github.com/prusa3d/PrusaSlicer/issues/11924#issuecomment-1893828222, or unsubscribe https://github.com/notifications/unsubscribe-auth/BEXBBUU2PYNAVWKSJF2W2KTYO2DJBAVCNFSM6AAAAABAXXTM3WVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQOJTHAZDQMRSGI . You are receiving this because you were mentioned.Message ID: @.***>
Description of the bug
I'm printing something that needs a color change. I select the required layer height and add the color change. Then I go to the first color and sucessfully change it to my first color. However, when I right click on the 2nd color in the slidebar, 2.7.1 just freezes. I'm not able to change the 2nd color to the color I want. When I hit ESC, it unlocks.
Project file & How to reproduce
TED_LASSO_BELIEVE_no_loop_0.15mm_PLA_MINI_8h18m.zip
Checklist of files included above
Version of PrusaSlicer
2.7.1
Operating system
Windows 10 Home, V. 22H2, OS Build = 19045.3803
Printer model
Prusa Mini +