search

prusa3d / PrusaSlicer

G-code generator for 3D printers (RepRap, Makerbot, Ultimaker etc.)
https://www.prusa3d.com/prusaslicer/
GNU Affero General Public License v3.0
7.39k stars 1.87k forks source link

Vase mode glitch #12666

Open MxTale opened 2 weeks ago

MxTale commented 2 weeks ago

Description of the bug

When slicing in vase mode, the GCODE generated makes the nozzle go trought the last layer Capture d’écran 2024-04-28 161405

Project file & How to reproduce

Capture d’écran 2024-04-28 161405 PlantPot_DiamondCut.zip

Checklist of files included above

Version of PrusaSlicer

2.7.2

Operating system

W11

Printer model

Anycubic Kobra

u89djt commented 2 weeks ago

Your model has spikes at the top, so there's no sensible way to print the last one-and-a-bit layers. image-1 image image-2 When you cut the spikes off, it slices ok. image-1 (not affiliated with Prusa)

MxTale commented 2 weeks ago

Thanks Dave!

From: Dave T. @.> Sent: Sunday, April 28, 2024 8:12:55 PM To: prusa3d/PrusaSlicer @.> Cc: MxTale @.>; Author @.> Subject: Re: [prusa3d/PrusaSlicer] Vase mode glitch (Issue #12666)

Your model has spikes at the top, so there's no sensible way to print the last one-and-a-bit layers. image-1.png (view on web)https://github.com/prusa3d/PrusaSlicer/assets/75209005/27437b9c-a265-4668-917b-b377e36c92c4 image.png (view on web)https://github.com/prusa3d/PrusaSlicer/assets/75209005/04b718d1-24da-4ef2-9819-92a5294f3df4 image-2.png (view on web)https://github.com/prusa3d/PrusaSlicer/assets/75209005/b700f346-f06c-493f-a74f-65013e608a67 When you cut the spikes off, it slices ok. image-1.png (view on web)https://github.com/prusa3d/PrusaSlicer/assets/75209005/66b9f794-0a65-4074-8628-71887705cd27 (not affiliated with Prusa)

— Reply to this email directly, view it on GitHubhttps://github.com/prusa3d/PrusaSlicer/issues/12666#issuecomment-2081583913, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BBJ47ZFABXPDLU55B2CT243Y7U32PAVCNFSM6AAAAABG5AVJFWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAOBRGU4DGOJRGM. You are receiving this because you authored the thread.Message ID: @.***>

u89djt commented 2 weeks ago

@MxTale You're very welcome! I often have a look at models on github to see if there are any warnings ahead of crashing into an issue myself. I had a go at making it print the whole volume in vase mode out of curiosity. I think there's no point, since it takes longer than a normal print, but you might enjoy seeing it: spiralled base PlantPot_DiamondCut.zip