Open Kito221170 opened 1 week ago
Also an empty preview
Hi @Kito221170, thank you for you report. Unfortunately I was not able to reproduce this issue. May I kindly ask you to provide me with 3mf of the project which shows this behavior for further investigation? Thank you and have a nice day!
With any STL, 3MF, OBJ or any file I don't have a PREVIEW of the sliced part.
Hi again! Yes, I do understand that. However, we will need to have a look at your settings and configurations that might be causing this. That is why I would like to ask you to save one of the models as 3MF and add it to this issue. Thank you!
I have the same problem
Держатель экрана.zip
The problem continues with the final version 2.8.0.
I'm having the same problem.
After updating to Prusa Version 2.8.0+win64, the system when slicing the part does not appear on the sliced table, the menus are all ok, just the part disappears, I can use any standard printer in Prusa and it happens the same.
Windows 10 Pro
Thank you all for submiting the files. But we still couldn't reproduce. It might be connected to OpenGL. Would anyone be so kind to share the system info screen (Help->System Info)? Thanks!
Thank you all for submiting the files. But we still couldn't reproduce. It might be connected to OpenGL. Would anyone be so kind to share the system info screen (Help->System Info)? Thanks!
I´m having the same problem right now and try to install newest grafic driver right now.
PrusaSlicer Version: 2.8.0+win64 Build: PrusaSlicer-2.8.0+win64-202406270929
Operating System: Windows System Architecture: 64 bit Windows Version: Windows 10 (Erzeugungsversion 19045), 64-bit Edition Total RAM size [MB]: 34,256MB OpenGL installation GL version: 4.6.0 (4.6.0 NVIDIA 552.44) Profile: Core Vendor: NVIDIA Corporation Renderer: NVIDIA GeForce RTX 2070 SUPER/PCIe/SSE2 GLSL version: 4.60.0 Textures compression: Enabled Mutisampling: Enabled (4 samples)
Ok, installing new grafic driver didn´t change anything.
PrusaSlicer Version: 2.8.0+win64 Build: PrusaSlicer-2.8.0+win64-202406270929
Operating System: Windows System Architecture: 64 bit Windows Version: Windows 10 (Erzeugungsversion 19045), 64-bit Edition Total RAM size [MB]: 34,256MB OpenGL installation GL version: 4.6.0 (4.6.0 NVIDIA 556.12) Profile: Core Vendor: NVIDIA Corporation Renderer: NVIDIA GeForce RTX 2070 SUPER/PCIe/SSE2 GLSL version: 4.60.0 Textures compression: Enabled Mutisampling: Enabled (4 samples)
Same problem here.
PrusaSlicer Version: 2.8.0+win64 Build: PrusaSlicer-2.8.0+win64-202406270929
Operating System: Windows System Architecture: 64 bit Windows Version: Windows 10 (compilación 19045), edición de 64 bits Total RAM size [MB]: 8,570MB OpenGL installation GL version: 3.3.0 (3.3.0) Profile: Core Vendor: NVIDIA Corporation Renderer: GeForce 315M/PCIe/SSE2 GLSL version: 3.30.0 Textures compression: Enabled Mutisampling: Enabled (4 samples)
Nome do Sistema Operacional Microsoft Windows 11 Pro Versão 10.0.22621 Compilação 22621 Outra Descrição do Sistema Operacional Não disponível Fabricante do Sistema Operacional Microsoft Corporation Nome do sistema SINGDESKTOP Fabricante do sistema System manufacturer Modelo do sistema System Product Name Tipo do sistema PC baseado em X64 SKU do sistema To Be Filled By O.E.M. Processador AMD FX(tm)-6300 Six-Core Processor, 3500 Mhz, 3 Núcleo(s), 6 Processador(es) Lógico(s) Versão/data do BIOS American Megatrends Inc. 1201, 04/03/2017 Versão do SMBIOS 2.5 Versão do Controlador Incorporado 255.255 Modo da BIOS Herdado Fabricante da BaseBoard ASUSTeK Computer INC. Produto BaseBoard M5A78L-M LX/BR Versão da BaseBoard Rev X.0x Função da Plataforma Área de Trabalho Estado da Inicialização Segura Sem suporte Configuração PCR7 Ligação Impossível Pasta do Windows C:\Windows Pasta do sistema C:\Windows\system32 Dispositivo de inicialização \Device\HarddiskVolume1 Localidade Brasil Camada de Abstração de Hardware Versão = "10.0.22621.2506" Nome de usuário SingDesktop\singd Fuso horário Hora oficial do Brasil Memória Física (RAM) Instalada 8,00 GB Memória física total 7,73 GB Memória física disponível 3,05 GB Memória virtual total 11,0 GB Memória virtual disponível 5,60 GB Espaço do arquivo de paginação 3,25 GB Arquivo de paginação C:\pagefile.sys Proteção de DMA de Kernel Desativado Segurança baseada em virtualização Não habilitado Política do Controle de Aplicativos do Windows Defender Imposto Política do modo de usuário do Controle de Aplicativos do Windows Defender Desativado Suporte à Criptografia de Dispositivo Motivos da falha da criptografia de dispositivo automática: TPM não utilizável, Associação PCR7 não compatível, Falha na Interface de Teste de Segurança de Hardware, e o dispositivo não está em Espera Moderna, Barramento/dispositivos compatíveis com DMA não permitidos detectados, TPM não utilizável Hyper-V - Extensões de Modo Monitor VM Sim Hyper-V - Extensões de Conversão de Endereços de Segundo Nível Sim Hyper-V - Virtualização Habilitada no Firmware Sim Hyper-V - Proteção de Execução de Dados Sim
Nome NVIDIA GeForce 210 Identificação de dispositivo PNP PCI\VEN_10DE&DEV_0A65&SUBSYS_80941462&REV_A2\4&2A1FC852&0&0010 Tipo de adaptador GeForce 210, compatível com NVIDIA Descrição do adaptador NVIDIA GeForce 210 Memória RAM do adaptador 1,00 GB (1.073.741.824 bytes) Drivers instalados nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll Versão do driver 21.21.13.4201 Arquivo INF oem15.inf (seção Section004) Planos de cores Não disponível Entradas da tabela de cores 4294967296 Resolução 1920 x 1080 x 60 Hertz Bits/Pixel 32 Endereço de memória 0xFD000000-0xFDFFFFFF Endereço de memória 0xD0000000-0xDFFFFFFF Endereço de memória 0xCE000000-0xCFFFFFFF Porta de E/S 0x0000DC80-0x0000DCFF Canal IRQ IRQ 18 Driver C:\WINDOWS\SYSTEM32\DRIVERS\NVLDDMKM.SYS (21.21.13.4201, 12,32 MB (12.914.360 bytes), 16/06/2024 19:54)
Nome ATI Radeon 3000 Graphics Identificação de dispositivo PNP PCI\VEN_1002&DEV_9616&SUBSYS_83881043&REV_00\4&52E5CC6&0&2808 Tipo de adaptador ATI display adapter (0x9616), compatível com Advanced Micro Devices, Inc. Descrição do adaptador ATI Radeon 3000 Graphics Memória RAM do adaptador 256,00 MB (268.435.456 bytes) Drivers instalados aticfx64.dll,aticfx64.dll Versão do driver 8.970.100.9001 Arquivo INF oem6.inf (seção ati2mtag_RS780) Planos de cores Não disponível Entradas da tabela de cores 4294967296 Resolução 1280 x 1024 x 60 Hertz Bits/Pixel 32 Endereço de memória 0xB0000000-0xBFFFFFFF Porta de E/S 0x0000C000-0x0000CFFF Endereço de memória 0xFCFF0000-0xFCFFFFFF Endereço de memória 0xFCE00000-0xFCFFFFFF Canal IRQ IRQ 4294967293 Porta de E/S 0x000003B0-0x000003BB Porta de E/S 0x000003C0-0x000003DF Endereço de memória 0xA0000-0xBFFFF Driver C:\WINDOWS\SYSTEM32\DRIVERS\ATIKMPAG.SYS (8.14.1.6264, 351,50 KB (359.936 bytes), 13/01/2015 16:20)
PrusaSlicer Version: 2.8.0+win64 Build: PrusaSlicer-2.8.0+win64-202406270929
Operating System: Windows System Architecture: 64 bit Windows Version: Windows 10 (сборка 19045), 64-бит редакция Total RAM size [MB]: 4,293MB OpenGL installation GL version: 3.3.0 (3.3.0) Profile: Core Vendor: NVIDIA Corporation Renderer: GeForce 9600 GT/PCIe/SSE2 GLSL version: 3.30.0 Textures compression: Enabled Mutisampling: Enabled (0 samples)
mine:
PrusaSlicer Version: 2.7.5-rc1+win64 Build: PrusaSlicer-2.7.5-rc1+win64-202406070441
Operating System: Windows System Architecture: 64 bit Windows Version: Windows 7 (build 7601, Service Pack 1), 64-bit edition Total RAM size [MB]: 6,441MB OpenGL installation GL version: 3.3.0 (3.3.0) Profile: Core Vendor: NVIDIA Corporation Renderer: GeForce 210/PCIe/SSE2 GLSL version: 3.30.0 Textures compression: Enabled
info: gcodeviewer also do not show the part on the bed from the generated (properly sliced) gcode
Same issue, came right after updating slicer to 2.8.0. Nothing helped from the following. restart program/windows/graphic driver, tested old working projects, etc...
It is interesting that the gcode implementation is working and even nozzle model appears visible while working with sliders
info: gcodeviewer also do not show the part on the bed from the generated (properly sliced) gcode
same as mine
NEWS: using the --sw-renderer switch on commandline, the sliced part is properly shown.
so, the problem is most likely on the OpenGL as TerPuc mentioned.
the problem first appeared on the 2.8.0-alpha5 (from 2.7.5-rc1)
@Malowz. Ok
NEWS: using the --sw-renderer switch on commandline, the sliced part is properly shown. tried this and also worked on my computer
Scusate come si usa l' opzione --sw-renderer sulla riga di comando. Scrivere ho provato questo e ha funzionato anche sul mio computer è come dire ho riparato la mia auto che non funzionava, e ora funziona, di come hai fatto in modo che possiamo farlo anche noi. !!!
Scusate come si usa l' opzione --sw-renderer sulla riga di comando. Scrivere ho provato questo e ha funzionato anche sul mio computer è come dire ho riparato la mia auto che non funzionava, e ora funziona, di come hai fatto in modo che possiamo farlo anche noi. !!!
You need to launch the Slicer from Windows command line: launch CMD, then go to Prusa Slicer directory and type: PrusaSlicer -sw-renderer Slicer will show the result, but will function terrible slow... useless..
Same problem here. W10Pro 22H2 NVIDIA GeForce GT 220
Same problem here. PrusaSlicer 2.8.0, W10Pro, running in Vmware. PrusaSlicer 2.7.1 works fine on same setup. Latest OrcaSlicer also previews or renders gcode on same setup.
You need to launch the Slicer from Windows command line: launch CMD, then go to Prusa Slicer directory and type: PrusaSlicer -sw-renderer
This method doesn't work for me, the preview is still empty
W10Pro 22H2 NVIDIA GeForce 9600 GT
The same problem after update.
Description of the bug
PREVIEW is empty after slicing.(2.8.0 rc1) 2.7.4 is ok.
![280rcSlicing](https://github.com/prusa3d/PrusaSlicer/assets/173831154/339c82b1-e5b8-481b-b038-5aef462a5056)
Project file & How to reproduce
PreviewEmpty.zip
Checklist of files included above
Version of PrusaSlicer
PrusaSlicer-2.8.0-rc1+win64-202406242049
Operating system
Edição Windows 11 Pro Versão 22H2 Instalado em 16/06/2024 Compilação do SO 22621.3737 Experiência Windows Feature Experience Pack 1000.22700.1009.0
Printer model
Elegoo Neptune 2S, Creality Ender 3