search

prusa3d / PrusaSlicer

G-code generator for 3D printers (RepRap, Makerbot, Ultimaker etc.)
https://www.prusa3d.com/prusaslicer/
GNU Affero General Public License v3.0
7.72k stars 1.93k forks source link

Problems slicing text #2060

Open tiendaaep opened 5 years ago

tiendaaep commented 5 years ago

Version

_Version of Slic3r Prusa Edition used goes here_1.42.0

Use About->About Slic3r for release versions

For -dev versions, use git describe --tag or get the hash value for the version you downloaded or git rev-parse HEAD

Operating system type + version Windows 10

What OS are you using, and state any version #s In case of 3D rendering issues, please attach the content of menu Help -> System Info dialog

3D printer brand / version + firmware version (if known) MK3

What 3D printer brand / version are you printing on, is it a stock model or did you modify the printer, what firmware is running on your printer, version of the firmware #s

Behavior

Is this a new feature request?

Project File (.3MF) where problem occurs

Upload a Slic3r PE Project File (.3MF) (Plater -> Export plate as 3MF for Slic3r PE 1.41.2 and older, File -> Save / Save Project for Slic3r PE 1.42.0-alpha and newer)

bubnikv commented 5 years ago

would you attach the project file and screenshots of cura? Will enabling the thin walls help?

On Wed, Apr 3, 2019, 00:43 tiendaaep notifications@github.com wrote:

Version

_Version of Slic3r Prusa Edition used goes here_1.42.0

Use About->About Slic3r for release versions

For -dev versions, use git describe --tag or get the hash value for the version you downloaded or git rev-parse HEAD Operating system type + version Windows 10

What OS are you using, and state any version #s In case of 3D rendering issues, please attach the content of menu Help -> System Info dialog 3D printer brand / version + firmware version (if known) MK3

What 3D printer brand / version are you printing on, is it a stock model or did you modify the printer, what firmware is running on your printer, version of the firmware #s Behavior

Is this a new feature request? Project File (.3MF) where problem occurs

Upload a Slic3r PE Project File (.3MF) (Plater -> Export plate as 3MF for Slic3r PE 1.41.2 and older, File -> Save / Save Project for Slic3r PE 1.42.0-alpha and newer)

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/prusa3d/Slic3r/issues/2060, or mute the thread https://github.com/notifications/unsubscribe-auth/AFj5I7rW8G6JW9hao2yXerJ5HAFMkV_Lks5vc90CgaJpZM4cZQ17 .

tiendaaep commented 5 years ago

Hi Bubnikc, i have enabled the thin walls and the slicing of the text has worked ok.

Thank you. Best regards. Isidoro.

El mié., 3 abr. 2019 a las 6:32, bubnikv (notifications@github.com) escribió:

would you attach the project file and screenshots of cura? Will enabling the thin walls help?

On Wed, Apr 3, 2019, 00:43 tiendaaep notifications@github.com wrote:

Version

_Version of Slic3r Prusa Edition used goes here_1.42.0

Use About->About Slic3r for release versions

For -dev versions, use git describe --tag or get the hash value for the version you downloaded or git rev-parse HEAD Operating system type + version Windows 10

What OS are you using, and state any version #s In case of 3D rendering issues, please attach the content of menu Help -> System Info dialog 3D printer brand / version + firmware version (if known) MK3

What 3D printer brand / version are you printing on, is it a stock model or did you modify the printer, what firmware is running on your printer, version of the firmware #s Behavior

Is this a new feature request? Project File (.3MF) where problem occurs

Upload a Slic3r PE Project File (.3MF) (Plater -> Export plate as 3MF for Slic3r PE 1.41.2 and older, File -> Save / Save Project for Slic3r PE 1.42.0-alpha and newer)

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/prusa3d/Slic3r/issues/2060, or mute the thread < https://github.com/notifications/unsubscribe-auth/AFj5I7rW8G6JW9hao2yXerJ5HAFMkV_Lks5vc90CgaJpZM4cZQ17

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/prusa3d/Slic3r/issues/2060#issuecomment-479335989, or mute the thread https://github.com/notifications/unsubscribe-auth/Au7x0stjYzNT9TE9SdN7kJ8GErZJGlilks5vdC75gaJpZM4cZQ17 .

tiendaaep commented 5 years ago

Hi Bubnikc, i have problems slicing my works.

When i must print text there is some lines that does not appear after slicing. I have text 3mm high.

What could i do to avoid this and print it ok?.

Thank you. Best regards. Isidoro.

El mié., 3 abr. 2019 a las 20:03, Tienda AEP (tiendaaep@gmail.com) escribió:

Hi Bubnikc, i have enabled the thin walls and the slicing of the text has worked ok.

Thank you. Best regards. Isidoro.

El mié., 3 abr. 2019 a las 6:32, bubnikv (notifications@github.com) escribió:

would you attach the project file and screenshots of cura? Will enabling the thin walls help?

On Wed, Apr 3, 2019, 00:43 tiendaaep notifications@github.com wrote:

Version

_Version of Slic3r Prusa Edition used goes here_1.42.0

Use About->About Slic3r for release versions

For -dev versions, use git describe --tag or get the hash value for the version you downloaded or git rev-parse HEAD Operating system type + version Windows 10

What OS are you using, and state any version #s In case of 3D rendering issues, please attach the content of menu Help -> System Info dialog 3D printer brand / version + firmware version (if known) MK3

What 3D printer brand / version are you printing on, is it a stock model or did you modify the printer, what firmware is running on your printer, version of the firmware #s Behavior

Is this a new feature request? Project File (.3MF) where problem occurs

Upload a Slic3r PE Project File (.3MF) (Plater -> Export plate as 3MF for Slic3r PE 1.41.2 and older, File -> Save / Save Project for Slic3r PE 1.42.0-alpha and newer)

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/prusa3d/Slic3r/issues/2060, or mute the thread < https://github.com/notifications/unsubscribe-auth/AFj5I7rW8G6JW9hao2yXerJ5HAFMkV_Lks5vc90CgaJpZM4cZQ17

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/prusa3d/Slic3r/issues/2060#issuecomment-479335989, or mute the thread https://github.com/notifications/unsubscribe-auth/Au7x0stjYzNT9TE9SdN7kJ8GErZJGlilks5vdC75gaJpZM4cZQ17 .

tiendaaep commented 5 years ago

Hi Bubnick, As i said in other occasion when i slice the model with CURA it works ok.

Enclosed i send the screenshots of CURA and the RMF of the model.

Thank you. Best regards. Isidoro.

El jue., 20 jun. 2019 a las 18:03, Tienda AEP (tiendaaep@gmail.com) escribió:

Hi Bubnikc, i have problems slicing my works.

When i must print text there is some lines that does not appear after slicing. I have text 3mm high.

What could i do to avoid this and print it ok?.

Thank you. Best regards. Isidoro.

El mié., 3 abr. 2019 a las 20:03, Tienda AEP (tiendaaep@gmail.com) escribió:

Hi Bubnikc, i have enabled the thin walls and the slicing of the text has worked ok.

Thank you. Best regards. Isidoro.

El mié., 3 abr. 2019 a las 6:32, bubnikv (notifications@github.com) escribió:

would you attach the project file and screenshots of cura? Will enabling the thin walls help?

On Wed, Apr 3, 2019, 00:43 tiendaaep notifications@github.com wrote:

Version

_Version of Slic3r Prusa Edition used goes here_1.42.0

Use About->About Slic3r for release versions

For -dev versions, use git describe --tag or get the hash value for the version you downloaded or git rev-parse HEAD Operating system type + version Windows 10

What OS are you using, and state any version #s In case of 3D rendering issues, please attach the content of menu Help -> System Info dialog 3D printer brand / version + firmware version (if known) MK3

What 3D printer brand / version are you printing on, is it a stock model or did you modify the printer, what firmware is running on your printer, version of the firmware #s Behavior

Is this a new feature request? Project File (.3MF) where problem occurs

Upload a Slic3r PE Project File (.3MF) (Plater -> Export plate as 3MF for Slic3r PE 1.41.2 and older, File -> Save / Save Project for Slic3r PE 1.42.0-alpha and newer)

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/prusa3d/Slic3r/issues/2060, or mute the thread < https://github.com/notifications/unsubscribe-auth/AFj5I7rW8G6JW9hao2yXerJ5HAFMkV_Lks5vc90CgaJpZM4cZQ17

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/prusa3d/Slic3r/issues/2060#issuecomment-479335989, or mute the thread https://github.com/notifications/unsubscribe-auth/Au7x0stjYzNT9TE9SdN7kJ8GErZJGlilks5vdC75gaJpZM4cZQ17 .