bubnikv
commented
5 years ago This is interesting. Do you have an idea why this is happening? Did you compare the G-codes generated by 1.41.2 vs. 1.42.0-beta2?
On Mon, Apr 29, 2019 at 6:24 AM Rarstorm notifications@github.com wrote:
Slic3r Prusa Edition 1.42.0-beta2
Windows 10 Home Single Language Version 1809
During print. Always in the first 2 or 3 layers, the nozzle stops and crashes into the print. It did not happen on the Alphas. I'm 100% sure is the slicer, because if I go back to the lates alpha, or slice with other program like Cura, there is no problem with the print.
Printer Anycubic i3 Mega Board Trigorilla Marlin 2.0 Project File (.3MF) where problem occurs
Upload a Slic3r PE Project File (.3MF) (Plater -> Export plate as 3MF for Slic3r PE 1.41.2 and older, File -> Save / Save Project for Slic3r PE 1.42.0-alpha and newer)
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/prusa3d/Slic3r/issues/2188, or mute the thread https://github.com/notifications/unsubscribe-auth/ABMPSI7FMBCIGTQVF2OXEVLPSZZ7NANCNFSM4HJAH2VQ .
Slic3r Prusa Edition 1.42.0-beta2
Windows 10 Home Single Language Version 1809
During print. Always in the first 2 or 3 layers, the nozzle stops and crashes into the print. It did not happen on the Alphas. I'm 100% sure is the slicer, because if I go back to the lates alpha, or slice with other program like Cura, there is no problem with the print.
Printer Anycubic i3 Mega Board Trigorilla Marlin 2.0
Project File (.3MF) where problem occurs
Upload a Slic3r PE Project File (.3MF) (
Plater -> Export plate as 3MFfor Slic3r PE 1.41.2 and older,File -> Save/Save Projectfor Slic3r PE 1.42.0-alpha and newer)