search

prusa3d / PrusaSlicer

G-code generator for 3D printers (RepRap, Makerbot, Ultimaker etc.)
https://www.prusa3d.com/prusaslicer/
GNU Affero General Public License v3.0
7.65k stars 1.92k forks source link

unerwarteter Filamentwechsel #3568

Closed Martin1161 closed 4 years ago

Martin1161 commented 4 years ago

Version

Version of PrusaSlicer used goes here Slicer Version: PrusaSlicer-2.1.0+win64-201909160915 basiert auf Slic3r Use About->About PrusaSlicer for release versions

For -dev versions, use git describe --tag or get the hash value for the version you downloaded or git rev-parse HEAD

Operating system type + version

What OS are you using, and state any version #s In case of 3D rendering issues, please attach the content of menu Help -> System Info dialog

3D printer brand / version + firmware version (if known)

What 3D printer brand / version are you printing on, is it a stock model or did you modify the printer, what firmware is running on your printer, version of the firmware #s

WINDOWS 10, RAM 8GB, Prozessor INTEL i5-6402PCPU 2,80GHz, 64-Bit Betriebssystem x64 basierter Prozessor

Behavior ---> see below

Is this a new feature request?

Project File (.3MF) where problem occurs

Upload a PrusaSlicer Project File (.3MF) (Plater -> Export plate as 3MF for Slic3r PE 1.41.2 and older, File -> Save / Save Project for PrusaSlicer, Slic3r PE 1.42.0-alpha and newer) Images (PNG, GIF, JPEG), PDFs or text files could be drag & dropped to the issue directly, while all other files need to be zipped first (.zip, .gz)

Hallo zusammen,

Slicer Version: PrusaSlicer-2.1.0+win64-201909160915 basiert auf Slic3r Drucke: Original Prusa i3 MK3

Druckeinstellung 0,2 mm Quality MK3 - geändert auf 4 Konturen und Bienenwabe Filament PETG

Erwartetes Verhalten: unterbrechungsloser Druck, ohne Filamentwechsel

Problembeschreibung: Druck unterbricht ständig, nachdem die ersten 3 mm problemlos gedruckt, wurden den Weiterdruck und fordert einen Filamentwechsel auf. Dies geschieht während des druckes einer Schicht ca 3mal. Ca. 20 Wechsel (Filament herausgezogen und wieder eingelegt) wurden durchgeführt, danach wurde der Druck manuell gestoppt. Druck besteht aus drei einzelnen STL Objekten (filamentbedarf berechnet ca 110gr Druckzeit erwartet 11h58 min.

Ich hoffe ihr könnt weiterhelfen. LG Martin

config.ini:

generated by PrusaSlicer 2.1.0+win64 on 2020-01-23 at 23:26:39 UTC

avoid_crossing_perimeters = 0 bed_custom_model = bed_custom_texture = bed_shape = 0x0,250x0,250x210,0x210 bed_temperature = 85 before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n between_objects_gcode = bottom_fill_pattern = rectilinear bottom_solid_layers = 4 bridge_acceleration = 1000 bridge_angle = 0 bridge_fan_speed = 50 bridge_flow_ratio = 0.95 bridge_speed = 30 brim_width = 5 clip_multipart_objects = 1 colorprint_heights = compatible_printers_condition_cummulative = "printer_notes=~/.PRINTER_VENDOR_PRUSA3D./ and printer_notes=~/.PRINTER_MODEL_MK3./ and nozzle_diameter[0]==0.4";"nozzle_diameter[0]!=0.6 and ! (printer_notes=~/.PRINTER_VENDOR_PRUSA3D./ and printer_notes=~/.PRINTER_MODEL_MK(2.5|3)./ and single_extruder_multi_material)" complete_objects = 0 cooling = 1 cooling_tube_length = 5 cooling_tube_retraction = 91.5 default_acceleration = 1000 default_filament_profile = "Prusament PLA" default_print_profile = 0.15mm QUALITY MK3 deretract_speed = 0 disable_fan_first_layers = 3 dont_support_bridges = 1 duplicate_distance = 6 elefant_foot_compensation = 0 end_filament_gcode = "; Filament-specific end gcode" end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors ensure_vertical_shell_thickness = 1 external_perimeter_extrusion_width = 0.45 external_perimeter_speed = 25 external_perimeters_first = 0 extra_loading_move = -2 extra_perimeters = 0 extruder_clearance_height = 20 extruder_clearance_radius = 20 extruder_colour = "" extruder_offset = 0x0 extrusion_axis = E extrusion_multiplier = 1 extrusion_width = 0.45 fan_always_on = 0 fan_below_layer_time = 20 filament_colour = #8F8F8F filament_cooling_final_speed = 3.4 filament_cooling_initial_speed = 2.2 filament_cooling_moves = 4 filament_cost = 24.99 filament_density = 1.27 filament_deretract_speed = nil filament_diameter = 1.75 filament_load_time = 0 filament_loading_speed = 28 filament_loading_speed_start = 3 filament_max_volumetric_speed = 8 filament_minimal_purge_on_wipe_tower = 15 filament_notes = "" filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_retract_before_travel = nil filament_retract_before_wipe = nil filament_retract_layer_change = nil filament_retract_length = nil filament_retract_lift = nil filament_retract_lift_above = nil filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_speed = nil filament_settings_id = "Das Filament PETG" filament_soluble = 0 filament_toolchange_delay = 0 filament_type = PET filament_unload_time = 0 filament_unloading_speed = 90 filament_unloading_speed_start = 100 filament_wipe = nil fill_angle = 45 fill_density = 30% fill_pattern = honeycomb first_layer_acceleration = 1000 first_layer_bed_temperature = 80 first_layer_extrusion_width = 0.42 first_layer_height = 0.2 first_layer_speed = 20 first_layer_temperature = 235 gap_fill_speed = 40 gcode_comments = 0 gcode_flavor = marlin gcode_label_objects = 0 high_current_on_filament_swap = 0 host_type = octoprint infill_acceleration = 1250 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.45 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 25% infill_speed = 80 inherits_cummulative = "0.20mm QUALITY MK3";"Prusament PETG"; interface_shells = 0 layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] layer_height = 0.2 machine_max_acceleration_e = 5000,5000 machine_max_acceleration_extruding = 1250,1250 machine_max_acceleration_retracting = 1250,1250 machine_max_acceleration_x = 1000,960 machine_max_acceleration_y = 1000,960 machine_max_acceleration_z = 1000,1000 machine_max_feedrate_e = 120,120 machine_max_feedrate_x = 200,100 machine_max_feedrate_y = 200,100 machine_max_feedrate_z = 12,12 machine_max_jerk_e = 1.5,1.5 machine_max_jerk_x = 8,8 machine_max_jerk_y = 8,8 machine_max_jerk_z = 0.4,0.4 machine_min_extruding_rate = 0,0 machine_min_travel_rate = 0,0 max_fan_speed = 50 max_layer_height = 0.25 max_print_height = 210 max_print_speed = 200 max_volumetric_speed = 0 min_fan_speed = 30 min_layer_height = 0.07 min_print_speed = 15 min_skirt_length = 4 notes = nozzle_diameter = 0.4 only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = {input_filenamebase}{layerheight}mm{filamenttype[0]}{printer_model}.gcode overhangs = 1 parking_pos_retraction = 92 perimeter_acceleration = 800 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 perimeter_speed = 45 perimeters = 4 post_process = print_host = print_settings_id = 0.20mm QUALITY MK3 - 4 Konturen_Wabe printer_model = MK3 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n printer_settings_id = Original Prusa i3 MK3 printer_technology = FFF printer_variant = 0.4 printer_vendor = printhost_apikey = printhost_cafile = raft_layers = 0 remaining_times = 1 resolution = 0 retract_before_travel = 1 retract_before_wipe = 0% retract_layer_change = 1 retract_length = 0.8 retract_length_toolchange = 4 retract_lift = 0.6 retract_lift_above = 0 retract_lift_below = 209 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 35 seam_position = nearest serial_port = serial_speed = 250000 silent_mode = 1 single_extruder_multi_material = 0 single_extruder_multi_material_priming = 0 skirt_distance = 2 skirt_height = 3 skirts = 1 slice_closing_radius = 0.049 slowdown_below_layer_time = 20 small_perimeter_speed = 25 solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.45 solid_infill_speed = 80 spiral_vase = 0 standby_temperature_delta = -5 start_filament_gcode = "M900 K{if printer_notes=~/.PRINTER_HAS_BOWDEN./}200{elsif nozzle_diameter[0]==0.6}22{else}45{endif} ; Filament gcode" start_gcode = M862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.8.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} support_material = 1 support_material_angle = 0 support_material_auto = 1 support_material_buildplate_only = 1 support_material_contact_distance = 0.1 support_material_enforce_layers = 0 support_material_extruder = 0 support_material_extrusion_width = 0.35 support_material_interface_contact_loops = 0 support_material_interface_extruder = 0 support_material_interface_layers = 2 support_material_interface_spacing = 0.2 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 2 support_material_speed = 50 support_material_synchronize_layers = 0 support_material_threshold = 55 support_material_with_sheath = 0 support_material_xy_spacing = 50% temperature = 225 thin_walls = 0 threads = 4 toolchange_gcode = top_fill_pattern = hilbertcurve top_infill_extrusion_width = 0.4 top_solid_infill_speed = 40 top_solid_layers = 5 travel_speed = 180 use_firmware_retraction = 0 use_relative_e_distances = 1 use_volumetric_e = 0 variable_layer_height = 1 wipe = 1 wipe_into_infill = 0 wipe_into_objects = 0 wipe_tower = 1 wipe_tower_bridging = 10 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 170 wipe_tower_y = 125 wiping_volumes_extruders = 70,70 wiping_volumes_matrix = 0 xy_size_compensation = 0 z_offset = 0

Druckproblem.pptx

rtyr commented 4 years ago

It looks like issue with the filament sensor. Filament sensor can be turned off (lcd menu), you can try it.

bubnikv commented 4 years ago

no response, closing.