[2.3.0-alpha3] - Extrusion width not as per input parameters

[jeblaze]

Version

2.3.0-alpha3

Operating system type + version

Windows 10 Pro 20H2 x64

3D printer brand / version + firmware version

Creality CR-10S Pro V2 with Mosquito Hot-End - Using Marlin 2.6.1 with DGUS reloaded touchscreen firmware

Behavior

• With identical slicing parameters between PS 2.2.0 and 2.3.0-alpha3, PS 2.3.0-alpha3 seems to generate way thinner lines than input parameters, prints are also as per slicing result. Edit: Seems to be 4x smaller...
• See attached config.ini generated from PS 2.3.0-alpha3 in the .ZIP file
• Should be the same as PS 2.2.0
• Actual Results (for those who wonder, it's a drop-in Mosquito adapter for the CR-10S Pro that I designed)
  • PS 2.3.0-alpha3, extrusion width 0.4mm
  • PS 2.2.0, extrusion width 0.4mm

Project File (.3MF) where problem occurs

See .ZIP file.

Attached files

PS_2.3.0-alpha3.zip

[rtyr]

Your extrusion width is set to 0.12mm, not 0.4mm. I don't see any issue here.

[rtyr]

No response. Closing.