Closed P1RA7A closed 1 year ago
Could you also attach some g-code which works for you?
FYI @pmjdebruijn
In the message, I leave you a compressed Gcode that has been valid for me in another program.
I'm going to send you a more basic Gcode, in case you're going to print it.
De: @.> Enviado: miércoles, 14 de septiembre de 2022 21:39 Para: @.> CC: @.>; @.> Asunto: Re: [prusa3d/PrusaSlicer] gcode reading (Issue #8883)
Could you also attach some g-code which works for you?
FYI @pmjdebruijnhttps://github.com/pmjdebruijn
— Reply to this email directly, view it on GitHubhttps://github.com/prusa3d/PrusaSlicer/issues/8883#issuecomment-1247277689, or unsubscribehttps://github.com/notifications/unsubscribe-auth/A3CLDIYFHRSTF6TOJ5PEQ5LV6IZWLANCNFSM6AAAAAAQMYOMTA. You are receiving this because you authored the thread.Message ID: @.***>
It might be a firmware bug... Do you have your S1 Pro on the latest firmware? And if so, which version exactly?
Also, if you remove G29 from the start_gcode in the printer settings, does the problem then disappear for you?
It is not possible to upload files via e-mail, you have to add it via web interface.
Thank you very much, you are an artist, just removing the G29 from the configuration, it prints the pieces again, Thank you XD
De: Pascal de @.> Enviado: miércoles, 14 de septiembre de 2022 21:49 Para: @.> CC: @.>; @.> Asunto: Re: [prusa3d/PrusaSlicer] Ender 3 S1 Pro gcode reading issue (Issue #8883)
It might be a firmware bug... Do you have your S1 Pro on the latest firmware? And if so, which version exactly?
Also, if you remove G29 from the start_gcode in the printer settings, does the problem then disappear for you?
— Reply to this email directly, view it on GitHubhttps://github.com/prusa3d/PrusaSlicer/issues/8883#issuecomment-1247287506, or unsubscribehttps://github.com/notifications/unsubscribe-auth/A3CLDI3T432VQWJ3ISYM3SLV6I25TANCNFSM6AAAAAAQMYOMTA. You are receiving this because you authored the thread.Message ID: @.***>
From Creality slicer (no G29)
G28 ;Home
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up
G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position
G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up
Most likely it has RESTORE_LEVELING_AFTER_G28
turned on in firmware
@gudvinr yeah I figured as much.
@P1RA7A you didn't tell me your printer's firmware version yet...
Model: Ender 3 S1 PRO F/W : 2.0.8 15F4 DISPLAY: UI20.2 H/W: CR-FDM-v2.5.S1_1
De: Pascal de @.> Enviado: jueves, 15 de septiembre de 2022 16:34 Para: @.> CC: @.>; @.> Asunto: Re: [prusa3d/PrusaSlicer] Ender 3 S1 Pro gcode reading issue (Issue #8883)
@gudvinrhttps://github.com/gudvinr yeah I figured as much.
@P1RA7Ahttps://github.com/P1RA7A you didn't tell me your printer's firmware version yet...
— Reply to this email directly, view it on GitHubhttps://github.com/prusa3d/PrusaSlicer/issues/8883#issuecomment-1248270695, or unsubscribehttps://github.com/notifications/unsubscribe-auth/A3CLDI7GUYMRT2BYM4PWTEDV6M6XZANCNFSM6AAAAAAQMYOMTA. You are receiving this because you were mentioned.Message ID: @.***>
2.0.8.2-SW-V2.0.8.13-MP-20211214 seems to be the newest, would you mind retesting with G29 enabled and the latest printer firmware?
Good afternoon, just now I was trying to print a part, with the G29 auto bed leveling activated, and I still have the error. I have to delete it from the Gcodes configuration and save the profile, to be able to print, last night I was able to make a small piece without problems, since I was able to disable it. There must be some incompatibility with the latest version of my printer and Prusa slicer, the old version of Prusa did not give me any problems. Could it be because of the Laser Marlin that Creality took out? It could be, I don't know. @.***
De: Pascal de @.> Enviado: jueves, 15 de septiembre de 2022 17:32 Para: @.> CC: @.>; @.> Asunto: Re: [prusa3d/PrusaSlicer] Ender 3 S1 Pro gcode reading issue (Issue #8883)
2.0.8.2-SW-V2.0.8.13-MP-20211214 seems to be the newest, would you mind retesting with G29 enabled and the latest printer firmware?
— Reply to this email directly, view it on GitHubhttps://github.com/prusa3d/PrusaSlicer/issues/8883#issuecomment-1248342688, or unsubscribehttps://github.com/notifications/unsubscribe-auth/A3CLDI3DVWGURMZXVZAGSQTV6NFP3ANCNFSM6AAAAAAQMYOMTA. You are receiving this because you were mentioned.Message ID: @.***>
@P1RA7A What happened isn't a mystery, but G29 failing this badly is most likely a firmware bug, which is why I'd like to you to try the latest firmware.
Fixed with 0.2.2 configuration update.
Description of the bug
Hello, With the new update Prusa Slicer, in my Ender 3 S1 Pro, all the G-Code projects that they carry out, the printer does not recognize the G-Code, The printer stays in automatic Bed Leveling mode and after 5 minutes it comes out error on the screen. I've restarted the program, completely uninstalled it and reinstalled it, and the problems continue. The same projects, I have passed it to other programs and everything works fine.
Hola, Con la nueva actualización Prusa Slicer, en mi Ender 3 S1 Pro, todos los proyectos de G-Codes que realiza, la impresora no reconoce el G-Code, La impresora se queda en modo Nivelación de cama en automáticos y a los 5 minutos me sale error en la pantalla. He reiniciado el programa, lo he desinstalado completo y vuelto a instalar, y sigue con le problemas. Los mismos proyectos, lo he pasado a otros programas y todo funciona bien.
Project file & How to reproduce
SOPORTE_1h42m_0,20mm_210C_PLA_ENDER3S1PRO.zip
Checklist of files included above
Version of PrusaSlicer
2.5.0
Operating system
windows 10
Printer model
Creality Ender 3 S1 Pro