bubnikv
commented
1 year ago Rendering G-code into an image file off-line without invoking the GUI window is currently not possible.
st 19. 10. 2022 v 2:42 odesílatel Alayt Ablam @.***> napsal:
Is your feature request related to a problem? Please describe. I'll be generating and augmenting Gcode files that only Prusa can help me visualize with the Gcode viewer, but would like to see if this can be done from the CLI since the process will be numerous and manual to be sliced each time.
Describe the solution you'd like Gcode Viewer incorporated into CLI
Describe how it would work Import a Gcode file and an STL file would emerge.
Describe alternatives you've considered Conducting this by hand in Prusa but it was not time efficient and would not allow me to scale.
Additional context This would be amazing for the augmentation of Gcode that is upcoming but at a rapid scale.
— Reply to this email directly, view it on GitHub https://github.com/prusa3d/PrusaSlicer/issues/9061, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABMPSI2IFUSPM2OGNYAGXOTWD47ZBANCNFSM6AAAAAARITH53U . You are receiving this because you are subscribed to this thread.Message ID: @.***>
Is your feature request related to a problem? Please describe. I'll be generating and augmenting Gcode files that only Prusa can help me visualize with the Gcode viewer, but would like to see if this can be done from the CLI since the process will be numerous and manual to be sliced each time.
Describe the solution you'd like Gcode Viewer incorporated into CLI
Describe how it would work Import a Gcode file and an STL file would emerge.
Describe alternatives you've considered Conducting this by hand in Prusa but it was not time efficient and would not allow me to scale.
Additional context This would be amazing for the augmentation of Gcode that is upcoming but at a rapid scale.