[ISSUE]: [SCUS_971.46 & SCES_511.76 & SCES_524.12]: Disney's Treasure Planet [zso], Jackie Chan Adventures SCES-52412

[VisionR1]

Checks

• [ ] I have checked existing OPL issues for duplicates and found none
• [X] I am using either OPL latest stable version, or archived version or OPL beta version

Describe the issue

I have try it some game zso format with OPL v1.2.0-Beta-1940-d58e721 seem to work until now, the game Disney's Treasure Planet i try it with zso not play only the iso format, and the Jackie Chan Adventures (Europe) not play with all format and mode, i try it and cso format but not show it inside in opl i dont know if support, what else format can try it?

Console model

SCPH-77004_BIOS_VX_PAL_220

OPL version / revision

OPL beta v1.2.0 1940

In which device(s) have you experienced this issue?

USB

Context and extra information

Disney's Treasure Planet SCUS_971.46 in zso format and Jackie Chan Adventures SCES-52412 all format

[INDRAPhilip]

What method did you use to compress the iso into zso from opl manger, maxcso or ziso.py by commands? No cso works in opl, zso is already a variation of it made for devices with little ram memory at most, it may be that in the future they add format to jso which should also be possible even with file limit of up to 4 GB per ' iso' cannot be higher, but for now there is no prediction that this will be implemented. So games incompatible with the zso format is normal, so I'll try to test these games to see if I can find something similar for you!

[VisionR1]

What method did you use to compress the iso into zso from opl manger, maxcso or ziso.py by commands? No cso works in opl, zso is already a variation of it made for devices with little ram memory at most, it may be that in the future they add format to jso which should also be possible even with file limit of up to 4 GB per ' iso' cannot be higher, but for now there is no prediction that this will be implemented. So games incompatible with the zso format is normal, so I'll try to test these games to see if I can find something similar for you!

Oh, understand, I use opl manager and maxcso I try all command

[INDRAPhilip]

Oh, understand, I use opl manager and maxcso I try all command

Did you use maxcso with that specific command 'maxcso --block=2048 --format=zso input.iso' If yes is correct, the method you are using for iso compression. I tested the games mentioned and Disney's Treasure Planet SCUS_971.46 it only works in iso and not in zso, however it is very different from Jackie Chan Adventures SCES-524.12 this works in iso and zso as long as mode 2 is enabled. Make sure your device is not fragmented or try compressing the iso in another program. I recommend this one below! ISO-ZSO Compressor

[VisionR1]

Oh, understand, I use opl manager and maxcso I try all command

Did you use maxcso with that specific command 'maxcso --block=2048 --format=zso input.iso' If yes is correct, the method you are using for iso compression. I tested the games mentioned and Disney's Treasure Planet SCUS_971.46 it only works in iso and not in zso, however it is very different from Jackie Chan Adventures SCES-524.12 this works in iso and zso as long as mode 2 is enabled. Make sure your device is not fragmented or try compressing the iso in another program. I recommend this one below! ISO-ZSO Compressor

Yeah I try this command, yes only in iso work, I try it Jackie Chan Adventures with mode 2 but not result maybe something I make wrong, I will try it

[VisionR1]

INDRAPhilip Que jackie chan baixar? Eu tenho download este

It wasn't from this site that I downloaded it, but it was from the same European version it should work the same way, but it was from this site that I downloaded my [Jackie Chan Adventures]

oh i know it, i try it again with format iso with mode 2 but for sure i format again the usb and try it

[AKuHAK]

@skelletR @INDRAPhilip no link to warez. If you want to share info about the game, use redump.org and compare md5 checksum of your iso.

[VisionR1]

thanks for the advice

[INDRAPhilip]

@skelletR não @INDRAPhilip ligação com Warez. Se você quiser compartilhar informações sobre o jogo, use redump.org e compare o exame md5 do seu iso.

Okay, I'm already doing that.

MD5 of the game I'm using is the same as on the site. redump.org by Md5Checker MD5 BA0D0CD39EA0193FECD8FE1670B3F878

[VisionR1]

I try it again, but the same result, only black screen and show me only inside logo Jackie (dragon icon) Chan Adventures and stuck there, maybe somethinh with my playstation or usb

[INDRAPhilip]

Eu tento de novo, mas o mesmo resultado, só tela preta e me mostrar apenas dentro do logotipo Jackie (ícone do dragão) Chan Adventures e preso lá, talvez algo assim com o meu playstation ou usb

Try another version of opl with another usb device, I tested it on the latest OPL and beta 1938 and it's working fine!

[VisionR1]

Eu tento de novo, mas o mesmo resultado, só tela preta e me mostrar apenas dentro do logotipo Jackie (ícone do dragão) Chan Adventures e preso lá, talvez algo assim com o meu playstation ou usb

Try another version of opl with another usb device, I tested it on the latest OPL and beta 1938 and it's working fine!

i try it with latest stable and the latest beta 1940 still the same the only left is another usb

[INDRAPhilip]

I only recommend using another USB Device if formatting in fat32 depending on the size of your device the cluster alignment is 4KB or 8KB in exfat always user 32KB, or 64KB NOT 128KB, as it makes the device very slow to load themes and games in the list.

[VisionR1]

I will try it, thanks for the advice, opl support exfat? Because have format in past and not recognize

[INDRAPhilip]

Yes, opl beta 1.2.0 already has support for exfat being better than previous format, but it will not work if you play a psx game through Popstarter.

[VisionR1]

Yes, opl beta 1.2.0 already has support for extfat being better than previous format, but it will not work if you play a psx game through Popstarter.

Oh, good, I try this tomorrow, bad for psx

[INDRAPhilip]

@skelletR I was retesting the games to make a report for 'Open-PS2-Loader-Compatibility-list' and to find out why Disney's Treasure Planet game on zso didn't work. At first I thought it was the new format, but it's actually GSM that was causing a black screen in the game. In the iso version, the game is only extremely fast, with GSM enabled different from the zso version which ends up causing the black screen. At least that's what solved the Game and it's working for me😅😌!

[VisionR1]

@skelletR I was retesting the games to make a report for 'Open-PS2-Loader-Compatibility-list' and to find out why Disney's Treasure Planet game on zso didn't work. At first I thought it was the new format, but it's actually GSM that was causing a black screen in the game. In the iso version, the game is only extremely fast, with GSM enabled different from the zso version which ends up causing the black screen. At least that's what solved the Game and it's working for me😅😌!

That's is interested, I will try it,what exactly make it to work the Disney's Treasure Planet in zso format? and the exfat not recognizes by the FreeDVDBoot

[INDRAPhilip]

That's is interested, I will try it,what exactly make it to work the Disney's Treasure Planet in zso format? and the exfat not recognizes by the FreeDVDBoot

For the game Disney's Treasure Planet in zso to work just do not enable any mode besides deactivating the GSM it worked normally. I don't know if you load OPL by USB through FreeDVDBoot, it may not work because it hasn't been updated to the new SDK, but in that case, it's only if you have a memory card, put Funtuna or Opentuna itself.

[VisionR1]

load OPL by USB through FreeDVDBoot

I give up, still not play, yeah i load OPL by USB through FreeDVDBoot

[VisionR1]

INDRAPhilip What exacly ps2 and version you have? i have ps2 slim bios SCPH-77004_BIOS_VX_PAL_220 with OPNPS2LD-v1.2.0-Beta-1940-d58e721 load OPL by USB through FreeDVDBoot

[AKuHAK]

i load OPL by USB through FreeDVDBoot

Try to load OPL from the FMCB menu, some games require that (Half-Life for example)

[VisionR1]

i load OPL by USB through FreeDVDBoot

Try to load OPL from the FMCB menu, some games require that (Half-Life for example)

unfortunately i don't have a memory card for ps2 only use and a dvd with FreeDVDBoot

[INDRAPhilip]

INDRAPhilip Que exacly ps2 e versão que você tem? i tenho ps2 bios slim SCPH-77004_BIOS_VX_PAL_220 com OPNPS2LD-v1.2.0-Beta-1940-d58e721 carga OPL por USB através freeDVDBoot

I have models 39001, 70001, and 90010 all ntsc u/c.

[VisionR1]

Thanks for the info

[INDRAPhilip]

infelizmente eu não tenho um cartão de memória para ps2 só uso e um dvd com FreeDVDBoot

In that case, I just recommend me to buy a Memory card or wait for an update of FreeDVDBoot for now, it doesn't get updates anymore, the most updated one you will find me will be ps2homebrew FreeDVDBoot.

[VisionR1]

Thanks for the advice, yeah not update, oh this is new FreeDVDBoot Pre-release, not see it again, thanks, maybe support exfat

[AKuHAK]

Thanks for the advice, yeah not update, oh this is new FreeDVDBoot Pre-release, not see it again, thanks, maybe support exfat

It is not necessary to burn another freedvdboot image. You can keep using the current. You can try to play with various Launchelf versions, just place them in usb and launch from FreeDVDBoot wlaunchelf, and then launch another wlaunchelf from usb, and then launch opl. Not sure if that helps, these games may require some strange iniialization from fmcb.

[VisionR1]

Thanks for the advice,

Thanks for the advice, i wiil try it, do you know any Launchelf with exfat support? because the problem is the original FreeDVDBoot not support exfat and when go to mass is empty and another Launchelf to launch must first from dvd and not support exfat and what the differrent https://github.com/CTurt/FreeDVDBoot with this https://github.com/ps2homebrew/FreeDVDBoot/releases/tag/latest ?

[VisionR1]

i found a solution must merge this https://github.com/ps2homebrew/wLaunchELF/releases/download/latest/BOOT.ELF into FreeDVDboot have instructions for Custom disc setup. and after that if work the exfat support work

[10522]

Disney's Treasure Planet [SCUS_971.46 & SCES_511.76]:

OPL Stable 1.1.0 SMB - black screen on startup OPL Stable 1.1.0 USB - works well

OPL Beta 1.2.0 1940 SMB ISO - black screen on startup OPL Beta 1.2.0 1940 SMB ZSO - works well OPL Beta 1.2.0 1940 USB ISO - works well OPL Beta 1.2.0 1940 USB ZSO - black screen on startup

OPL DB 914 SMB - works well OPL DB 914 USB - black screen on startup

Compatibility modes do not help.

Jackie Chan Adventures [SCES_524.12]:

OPL Beta 1.2.0 1940 SMB - freeze on logo Jackie Chan Adventures (ISO & ZSO) OPL Beta 1.2.0 1956 SMB (Mode 2) - works well (ISO & ZSO)

OPL Stable 1.1.0 SMB - works well

My PS2 model is SCPH-90008. I use redump images and don't use PADEMU, VMC, GSM.

[Phantasm90]

Regarding Jackie Chan Adventures, i tested the ISO with the beta build 1917 and the latest 1955 on SMB with mode 2 and PADEMU disabled and it works fine, my model is SCPH-90010

[VisionR1]

Finaly, until now Jackie Chan Adventures SCES-52412 zso format now play with latest opl OPNPS2LD-v1.2.0-Beta-1956-b226c61 on usb

[INDRAPhilip]

Finalmente, até agora Jackie Chan Adventures SCES-52412 formato zso agora jogar com o mais recente opl OPNPS2LD-v1.2.0-Beta-1956-b226c61 no usb

Sorry to contradict you friend, but this game was already working in zso since rev 1938 version, it only needed mode 2 active on the usb, but if it wasn't working for you before, I'm glad it's working for you now.

[VisionR1]

Not for me, I'm the one who opened it this for the 2 games in the title

[VisionR1]

Finally, is miracle, i try it today the disney treasure planet in zso format with PADEMU disabled Per Game and until now is working

OPNPS2LD-v1.2.0-Beta-1964-785c6f2 on usb

Console model SCPH-77004_BIOS_VX_PAL_220

[10522]

@skelletR, i checked OPL Beta 1.2.0 1964 and my report hasn't changed.

[VisionR1]

@skelletR, i checked OPL Beta 1.2.0 1964 and my report hasn't changed.

Really? Strange, for me now play

[INDRAPhilip]

@skelletR @10522 For me there was no change since version 1938 is working for me this game zso only needed to disable GSM this on all my USB test devices, MX4SIO and HDD. At least now it is working for someone else even though I find it strange this game works for some for others it does not.

[VisionR1]

@skelletR @10522 For me there was no change since version 1938 is working for me this game zso only needed to disable GSM this on all my USB test devices, MX4SIO and HDD. At least now it is working for someone else even though I find it strange this game works for some for others it does not.

Yeah, exactly is little strange

[AKuHAK]

It also matters how did you start the game. Some rare games will work only if you start them after classic ps2 browser showed up. So, for example, if you run fmcb first and then launch opl from fmcb, you will get more compatible results comparing if you run opl by holding button on start.

[Phantasm90]

The ZSO of Treasure Planet doesn't work for me on USB, i tried disabling the matrix chip, loading OPL through FunTuna Fork and start without a button, i still get a black screen, my model is SCPH-90010

[10522]

@AKuHAK, it's unbelievable, but I found the "magic" behind the OPL DB 914. It's the PS2 logo. I checked OPL DB 914 without PS2 logo. LEGO Racers 2 and Drome Racers didn't work for me. I then enabled the PS2 logo in OPL Beta 1.2.0 1964. LEGO Racers 2 NTSC and Drome Racers NTSC still didn't work for me. But LEGO Racers 2 PAL and Drome Racers PAL started working. I then activated the IGR and ran LEGO Racers 2 NTSC and Drome Racers NTSC again and they started working. But in OPL DB 914 they work directly, without PAL versions. Is it possible to create a Mode 7 that will always display the PS2 logo regardless of console region, like in OPL DB 914?

I have a PS2 PAL and this "magic" didn't work on Disney's Treasure Planet.

@INDRAPhilip, @skelletR, please check this report: Naruto Uzumaki Chronicles 2. I want to make sure this game doesn't work in any OPL version.

[VisionR1]

@AKuHAK, it's unbelievable, but I found the magic behind the OPL DB 914. It's the PS2 logo. I checked OPL DB 914 without PS2 logo. LEGO Racers 2 and Drome Racers didn't work for me. I then enabled the PS2 logo in OPL Beta 1.2.0 1964. LEGO Racers 2 NTSC and Drome Racers NTSC still didn't work for me. But LEGO Racers 2 PAL and Drome Racers PAL started working. I then activated the IGR and ran LEGO Racers 2 NTSC and Drome Racers NTSC again and they started working. But in OPL DB 914 they work directly, without PAL versions. Is it possible to create a mode 7 that will always display the PS2 logo regardless of console region, like in OPL DB 914?

I have a PS2 PAL and this magic didn't work on Disney's Treasure Planet.

@INDRAPhilip, @skelletR, please check this report: Naruto Uzumaki Chronicles 2. I want to make sure this game doesn't work in any OPL version.

Yeah, i confirm not work, i try all nothing work

OPNPS2LD-v1.2.0-Beta-1964-785c6f2 on usb

Console model SCPH-77004_BIOS_VX_PAL_220

[INDRAPhilip]

@INDRAPhilip, @skelletR, please check this report: Naruto Uzumaki Chronicles 2. I want to make sure this game doesn't work in any OPL version.

@10522 I have already reported It seems to be some error in the BDM Drive: BDM: bd_defrag: ERROR: fragment not found! SRD: Drive Error (sceCdGetError = 0x30) SRD: Drive Error (sceCdGetError = 0x30) Naruto Uzumaki Chronicles 2

[AKuHAK]

@skelletR @10522 @INDRAPhilip can you test this game on Deckard (SCPH-75000 and later models) slims with this opl version (from here)?

[VisionR1]

@skelletR @10522 @INDRAPhilip can you test this game on Deckard slims with this opl version (from here)?

You mean the game [SLUS_207.63 & SLES_519.17]: Beyond Good & Evil ? And Deckard slims is some settings in opl ?

[AKuHAK]

Deckard slims

Deckard slims are just SCPH-75000 and later models

[AKuHAK]

You mean the game [SLUS_207.63 & SLES_519.17]: Beyond Good & Evil ?

yes, both games are affected.

[VisionR1]

You mean the game [SLUS_207.63 & SLES_519.17]: Beyond Good & Evil ?

yes, both games are affected.

Ok, just now i try the SLUS_207.63, in iso format, usb and opl from above you write, i confirm sound effects keep repeating without change anything settings in opl

Console model SCPH-77004_BIOS_VX_PAL_220

[AKuHAK]

move this report in https://github.com/ps2homebrew/Open-PS2-Loader/issues/946