search

psas / liquid-engine-test-stand

A small liquid rocket engine test stand.
GNU General Public License v2.0
44 stars 15 forks source link

(1) Acquisition Phase: FEA Analysis and Sizing of Load Cells #24

Closed DylanStephens closed 4 years ago

DylanStephens commented 8 years ago

There will be four load cells measuring the engine's thrust. The design's measurements are in English units. The force should be applied to the bottom face of the hole that is above the relief cut. The file that needs to be analyzed can be found here: https://github.com/psas/liquid-engine-test-stand/tree/master/SW%20CAD/Test%20Stand%20Assembly Labeled as Loadcell7. The load cell needs to be analyzed for the maximum stress without yielding.

KyleMeeuwsen commented 8 years ago

After solving, send results to Dylan and discuss iterative analysis approach.

KyleMeeuwsen commented 8 years ago

Later- Temperature concerns to be addressed later. May necessitate a protective casing for environment isolation and thermocouples and possibly LOX lines for cooling around casing?