Closed DylanStephens closed 4 years ago
An adapter needs to be designed (make sure it can easily be manufactured) to connect the Engine thrust ring (Found here: https://github.com/psas/liquid-engine-test-stand/tree/master/Parts%20to%20be%20machined ) to the Liquid engine (Found here: https://github.com/psas/liquid-engine-capstone-2015/blob/master/SolidWorks_Files/Engine_Print_1/2016-06-08/Nozzle_Manifold.SLDPRT ). This part will need to attach to the inside of the thrust ring via the holes in the solidworks file and to the holes on the top of the liquid engine that can be seen in the attached image. There will need to be a space designed into the adapter to accommodate the pintle which is still being designed.
This ticket is to be accepted when the adapter has been designed and is approved by Dylan Stephens and Erin Schmidt.
An adapter needs to be designed (make sure it can easily be manufactured) to connect the Engine thrust ring (Found here: https://github.com/psas/liquid-engine-test-stand/tree/master/Parts%20to%20be%20machined ) to the Liquid engine (Found here: https://github.com/psas/liquid-engine-capstone-2015/blob/master/SolidWorks_Files/Engine_Print_1/2016-06-08/Nozzle_Manifold.SLDPRT ). This part will need to attach to the inside of the thrust ring via the holes in the solidworks file and to the holes on the top of the liquid engine that can be seen in the attached image. There will need to be a space designed into the adapter to accommodate the pintle which is still being designed.
This ticket is to be accepted when the adapter has been designed and is approved by Dylan Stephens and Erin Schmidt.