Fix build when using latest version of Arduino ESP32 (v3.0.0 and IDF v5.1)

[blackhack]

On the latest version of Arduino ESP32, those headers are not included by default, causing compilation errors, this doesn't cause problems in older versions.

Tested on both Arduino ESP32 and Arduino As Component of IDF 5.1.1.

d:\JDavid\Development\Arduino\Sketch\libraries\OneWireNg-master\src\platform\OneWireNg_ArduinoIdfESP32.cpp:59:3: error: #error "GPIO_PIN_COUNT not defined for this version of SDK"
   59 | # error "GPIO_PIN_COUNT not defined for this version of SDK"

d:\JDavid\Development\Arduino\Sketch\libraries\OneWireNg-master\src\platform\OneWireNg_ArduinoIdfESP32.cpp: In member function 'void OneWireNg_ArduinoIdfESP32::initDtaGpio(unsigned int, bool)':
d:\JDavid\Development\Arduino\Sketch\libraries\OneWireNg-master\src\platform\OneWireNg_ArduinoIdfESP32.cpp:161:12: error: 'GPIO_IS_VALID_GPIO' was not declared in this scope
  161 |     assert(GPIO_IS_VALID_GPIO((int)pin) && GPIO_IS_VALID_OUTPUT_GPIO((int)pin));
      |            ^~~~~~~~~~~~~~~~~~
d:\JDavid\Development\Arduino\Sketch\libraries\OneWireNg-master\src\platform\OneWireNg_ArduinoIdfESP32.cpp:161:44: error: 'GPIO_IS_VALID_OUTPUT_GPIO' was not declared in this scope
  161 |     assert(GPIO_IS_VALID_GPIO((int)pin) && GPIO_IS_VALID_OUTPUT_GPIO((int)pin));
      |                                            ^~~~~~~~~~~~~~~~~~~~~~~~~
d:\JDavid\Development\Arduino\Sketch\libraries\OneWireNg-master\src\platform\OneWireNg_ArduinoIdfESP32.cpp:63:25: error: 'GPIO' was not declared in this scope; did you mean 'PI'?
   63 | # define REG_GPIO_IN_LO GPIO.in.val
      |                         ^~~~
d:\JDavid\Development\Arduino\Sketch\libraries\OneWireNg-master\src\platform\OneWireNg_ArduinoIdfESP32.cpp:170:27: note: in expansion of macro 'REG_GPIO_IN_LO'
  170 |         _dtaGpio.inReg = &REG_GPIO_IN_LO;
      |                           ^~~~~~~~~~~~~~
"D:\\JDavid\\Development\\Arduino\\Sketch\\hardware\\espressif\\arduino-esp32/tools/xtensa-esp32-elf/bin/xtensa-esp32-elf-g++" -MMD -c "@D:\\JDavid\\Development\\Arduino\\Sketch\\hardware\\espressif\\arduino-esp32/tools/esp32-arduino-libs/esp32/flags/cpp_flags" -w -Os -DF_CPU=240000000L -DARDUINO=10607 -DARDUINO_ESP32_DEV -DARDUINO_ARCH_ARDUINO-ESP32 "-DARDUINO_BOARD=\"ESP32_DEV\"" "-DARDUINO_VARIANT=\"esp32\"" -DARDUINO_PARTITION_default "-DARDUINO_HOST_OS=\"windows\"" "-DARDUINO_FQBN=\"espressif:arduino-esp32:esp32:UploadSpeed=921600,CPUFreq=240,FlashFreq=80,FlashMode=qio,FlashSize=4M,PartitionScheme=default,DebugLevel=debug,PSRAM=disabled,LoopCore=1,EventsCore=1,EraseFlash=none,JTAGAdapter=default\"" -DESP32 -DCORE_DEBUG_LEVEL=4 -DARDUINO_RUNNING_CORE=1 -DARDUINO_EVENT_RUNNING_CORE=1 -DARDUINO_USB_CDC_ON_BOOT=0 "@D:\\JDavid\\Development\\Arduino\\Sketch\\hardware\\espressif\\arduino-esp32/tools/esp32-arduino-libs/esp32/flags/defines" "-IC:\\Users\\david\\AppData\\Local\\Temp\\.arduinoIDE-unsaved2023917-5960-1sbg54u.xbywf\\DallasTemperature" -iprefix "D:\\JDavid\\Development\\Arduino\\Sketch\\hardware\\espressif\\arduino-esp32/tools/esp32-arduino-libs/esp32/include/" "@D:\\JDavid\\Development\\Arduino\\Sketch\\hardware\\espressif\\arduino-esp32/tools/esp32-arduino-libs/esp32/flags/includes" "-ID:\\JDavid\\Development\\Arduino\\Sketch\\hardware\\espressif\\arduino-esp32/tools/esp32-arduino-libs/esp32/qio_qspi/include" "-ID:\\JDavid\\Development\\Arduino\\Sketch\\hardware\\espressif\\arduino-esp32\\cores\\esp32" "-ID:\\JDavid\\Development\\Arduino\\Sketch\\hardware\\espressif\\arduino-esp32\\variants\\esp32" "-Id:\\JDavid\\Development\\Arduino\\Sketch\\libraries\\OneWireNg-master\\src" "@C:\\Users\\david\\AppData\\Local\\Temp\\arduino\\sketches\\364C1B05CE87BB2EF11E96D015E13B20/build_opt.h" "d:\\JDavid\\Development\\Arduino\\Sketch\\libraries\\OneWireNg-master\\src\\platform\\Platform_Delay.cpp" -o "C:\\Users\\david\\AppData\\Local\\Temp\\arduino\\sketches\\364C1B05CE87BB2EF11E96D015E13B20\\libraries\\OneWireNg-master\\platform\\Platform_Delay.cpp.o"

Using library OneWireNg at version 0.13.1 in folder: D:\JDavid\Development\Arduino\Sketch\libraries\OneWireNg-master 

[brentru]

@pstolarz Please consider merging in and re-releasing.

related: https://github.com/espressif/arduino-esp32/issues/8776

[pstolarz]

Thanks for this. I'll need to fix CI/CD environment. I'm a little bit busy now, so give me a while...

[pstolarz]

v0.13.2 just released.