Inputs 1-3,6 work as digital inputs, but show change of status on signal edge instead of expected signal level
Input 4 show fixed value 0.224V
Input 5 works fine (physically inputs 4&5 are connected on the module)
Outputs 1,3 for some reason shown as inputs in stead of outputs
Here is how I configured my CC2530 module:
Here is how ioBroker interprets configuration:
Inputs 1-3,6 work as digital inputs, but show change of status on signal edge instead of expected signal level Input 4 show fixed value 0.224V Input 5 works fine (physically inputs 4&5 are connected on the module) Outputs 1,3 for some reason shown as inputs in stead of outputs
What am I doing wrong?