Open epvdvalk opened 1 year ago
@epvdvalk Hi, I see the scale factor field in your Z2M. What is wrong, exactly?
Hi ,thanks for the fast reply!
The switch for “enable zero calibration” is not available in Z2M.
Kindest regards, Epko.
Van: @.> Verzonden: vrijdag 8 september 2023 15:11 Aan: @.> CC: @.>; @.> Onderwerp: Re: [ptvoinfo/zigbee-configurable-firmware] HX711 and Home Assistant (Issue #229)
@epvdvalkhttps://github.com/epvdvalk Hi, I see the scale factor field in your Z2M. What is wrong, exactly?
— Reply to this email directly, view it on GitHubhttps://github.com/ptvoinfo/zigbee-configurable-firmware/issues/229#issuecomment-1711650055, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AQWLRAU6UZEQLJZJTCJPRJLXZMKRFANCNFSM6AAAAAA4QLK2DE. You are receiving this because you were mentioned.Message ID: @.***>
It also says “no converter available for state” (undefined)
Van: @.> Verzonden: vrijdag 8 september 2023 15:11 Aan: @.> CC: @.>; @.> Onderwerp: Re: [ptvoinfo/zigbee-configurable-firmware] HX711 and Home Assistant (Issue #229)
@epvdvalkhttps://github.com/epvdvalk Hi, I see the scale factor field in your Z2M. What is wrong, exactly?
— Reply to this email directly, view it on GitHubhttps://github.com/ptvoinfo/zigbee-configurable-firmware/issues/229#issuecomment-1711650055, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AQWLRAU6UZEQLJZJTCJPRJLXZMKRFANCNFSM6AAAAAA4QLK2DE. You are receiving this because you were mentioned.Message ID: @.***>
Hi, I finally got it working and calibrated the scale. I use the scale to measure the amount of salt in my water softener. Measured the salt weight and calibrated the scale. It started at 20 kg's but after a day it started drifting and after a week the scale shows -37kgs. How is this possible? Is there a fix for it?
This is the graph for the last week.
bump
@epvdvalk Sorry, but I cannot repeat this problem in one-day test. Can something enable/disable the tare mode automatically?
Hi, It is just not working as expected unfortunately. I have switched to a different type of load cell (the type you are using) but still there is no switch that enables the tare function unless I program a switch in the firmware.
Can I add multiple HX711 modules to 1 CC2652P module?
Hi, Thanks for the great software. I have made a scale using load cells and a HX711 amplifier. No issues with programming the CC2652 module and the integration is also ok. Saved a custom converter, also ok. Th thing is the calibration. My sclae factor switch is not available in HA/Z2M. What am I doing wrong here? See images: