Closed Beppi4U closed 3 years ago
O.K. ........found the problem! At wiring diagramm on the Si4703sample sketch the RST is wired to Arduino Pin 12 . On your website sample sketch the RST goes to A0 which is right and the Radio runs great! ;-)
......now i can add the buttons! ......and a little amp! ....and a case.....and ;-)
I have just checked the sketch on github and the RESET is connected to A0 (pin 14). I think you are using an old version. I'm not sure. Thanks.
On Sun, Jan 24, 2021 at 4:00 PM AndiLübeck notifications@github.com wrote:
O.K. ........found the problem! At wiring diagramm on the Si4703sample sketch the RST is wired to Arduino Pin 12 . On your website sample sketch the RST goes to A0 which is right and the Radio runs great! ;-)
[image: Unbenannt] https://user-images.githubusercontent.com/60713366/105640498-b2960b00-5e7e-11eb-9fcf-860ead273e5c.JPG
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/pu2clr/SI470X/issues/3#issuecomment-766413508, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAVSJNC3XVHLM6MMDDRDP7DS3RU5VANCNFSM4WQXR2QQ .
--
QRZ: http://www.qrz.com/db/PU2CLR Skype: ricardo_caratti Mobile: +55 61 981442296
Good to know. You are welcome. Ricardo.
On Sun, Jan 24, 2021 at 4:08 PM AndiLübeck notifications@github.com wrote:
......now i can add the buttons! ......and a little amp! ....and a case.....and ;-)
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/pu2clr/SI470X/issues/3#issuecomment-766414896, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAVSJNFULI3TOYQSKZU5QHDS3RVZTANCNFSM4WQXR2QQ .
--
QRZ: http://www.qrz.com/db/PU2CLR Skype: ricardo_caratti Mobile: +55 61 981442296
Hi there! Just build a radio for si4703! But i just can hear noise all around the band! Any suggestions of what i did wrong? Thanks Andreas!
20210124_192940.jpg