search

pulento / A1Evo_Electrified

Electron port of A1Evo
10 stars 0 forks source link

High Frequency Limit (1000-20000): Problem in EQ #3

Closed ManCaveAudio closed 1 month ago

ManCaveAudio commented 2 months ago

If you can see the all graphs, you can HPF applied or roll off in low end frequencies and null at 20Hz. This is because I tried not to apply 2nd filter (High Frequency Limit (1000-20000) and set it to 0.

I think it is because it was applying frequency range from 10 to 20 Hz.

Also, it will be great option if you can add HighPass Filter On or Off function.

image

pulento commented 1 month ago

Hi,

As I understantd yoy want High Pass LF at something about 20Hz ? You have great bass capabilities there and it seems the naturall rollof of your speakers are well below 20Hz; you want to cut that ? may affect the phase at LF and mess with the aligning algoritms of A1Evo.

Remember the current Beta don't apply any boost between 10-200Hz just the default A1Evo.

BTW no need to graph SW1o which is the vector average of the original Audyssey measurement.

pulento commented 1 month ago

No feedback