Solved:
• 3.2 Software Requirements
Unsolved:
• 2.4.2 Flashing the Device
Locate the .emProject file in the US_probe_nRF52_firmware folder as described and open it with Segger Embedded Studio.
Bottleneck: Unable to find the US_probe_nRF52_firmware folder.
• 2.5.1 Setting up the Toolchain
Install the Programmer application.
Bottleneck: The Programmer cannot be downloaded because the nRF Connect apps for Windows indicated in the manual are outdated.
Bottleneck of the Third Category:
• The user manual does not specify how to power up the transmitter part. As a result, we cannot ensure the probe is working, and the nRF52 dongle is not connected to the probe.
• If possible, we would appreciate a detailed, step-by-step procedure for the setup process, from start to successfully measuring the A-mode and B-mode graphs.
Solved: • 3.2 Software Requirements Unsolved: • 2.4.2 Flashing the Device Locate the .emProject file in the US_probe_nRF52_firmware folder as described and open it with Segger Embedded Studio. Bottleneck: Unable to find the US_probe_nRF52_firmware folder. • 2.5.1 Setting up the Toolchain Install the Programmer application. Bottleneck: The Programmer cannot be downloaded because the nRF Connect apps for Windows indicated in the manual are outdated. Bottleneck of the Third Category: • The user manual does not specify how to power up the transmitter part. As a result, we cannot ensure the probe is working, and the nRF52 dongle is not connected to the probe. • If possible, we would appreciate a detailed, step-by-step procedure for the setup process, from start to successfully measuring the A-mode and B-mode graphs.