The CCL and DCL paramter settings are higher in the aggregator as they are on the 2 Bat. Packs.
I've installed the serial bat driver as well, both Bat Packs have a setting of max 75A for discharge.
So DCL should not be higher than 150A, but is 225A, CCL is also higher than expected.
Hardware: RPi4
Setup: DVCC yes
Version: 3.0.61
The CCL and DCL paramter settings are higher in the aggregator as they are on the 2 Bat. Packs. I've installed the serial bat driver as well, both Bat Packs have a setting of max 75A for discharge. So DCL should not be higher than 150A, but is 225A, CCL is also higher than expected. Hardware: RPi4 Setup: DVCC yes Version: 3.0.61
config.json: root@raspberrypi4:~# cat /data/setupOptions/BatteryAggregator/config.json
{ "loglevel": "INFO", "currentRatioMethod": "capacity" }
Log: root@raspberrypi4:~# cat /var/log/BatteryAggregator/current