Open grahamrobertslx opened 3 years ago
@grahamrobertslx Hello, are you using an ESP8266 ?
Same here, RFM always stopped. Wemos D1 Mini, cable checked several times. No "unused" selected in Webinterface. How to debug? Thanks.
ESP8266 SystemSDK:2.2.2-dev(38a443e)/Core:3.0.2=30002000/lwIP:STABLE-2_1_2_RELEASE/glue:1.2-48-g7421258/BearSSL:6105635id
11748634
CPU
80 Mhz
heap
32280 - 31.52Kb
Fragmentation
8%
Chip Size
4194304 - 4.00Mb
Sketch Size
590192 - 576.36Kb
Free Space
1503232 - 1.43Mb
Flash Size
40000000 - 38.15Mb
Flash id
1458415
Flash vendor
239
MD5
0aa1762867fa7dadaae530070f7212b6
boot version
31
boot mode
1
sorry, always "quadruple" check. New rfm95, new wemos d1 mini, new setup and new soldering points, new debug build -> working. Thx.
Starting WAN system ... OK Strating LoRa module : OK Connected to : E4:XX:8A ip: 192.168.x.x
For some reason, my RFM initialises for 1 second and the goes to Stoped but then doesn't come out of stoped. Also my Wifi settings don't save. i have to re-enter and connect each time there is a power cycle.