Open saak2820 opened 5 years ago
puuu
commented
5 years ago What kind of weather sensor you are using? Is the protocol supported by pilight? What is the output of the Receive example?
Of all protocol I know, the message send by the sender is a repetition (3 or more) of the same pulse train. This pulse trains of the same message are compared for validation. Your 1 minute interval are different messages (of hopefully repeated pulse trains).
saak2820
commented
5 years ago Oh, I see. At least that was my first thought. Though the pulse train is parted on mingaplen. ESPiLight::mingaplen = 5100. Unfortunately the mingaplen isn’t used from each individual protocol. The actual "SYNC" Pulse in this case is about 4.0ms. And then, as the pulse train was never bin devided I made a wrong turn. In this case it might be a good idea to write a wrapper protocol to do so. Thanks for your Answer.
It is a new protocol. https://forum.pilight.org/showthread.php?tid=2621&page=2
i have 3 weather Sensors. each sending there data in 1 minute interval. the status check on received data depends on a second receiving and a string compare. Only then it will be published. the delay for repeat is to small for reconizing data as a second message. Furthermore, the other sensors will send there data and they obviously differ from the first one.
did i miss something? how can i get all three sensor data published without dumping the VALID check